Blackstar Dept. 10 AMPED 2 100-watt Guitar Amplifier Pedal with effects (last pic is the actual pedal/amp). Free shipping or free local pickup in our brick and mortar store in beautiful, luxurious Muncie, Indiana. Alaska, Hawaii, APO'S, FPO's and U.S. Territories email for a shipping quote, no international shipping.

A Stellar Floorboard Amp with Ear-grabbing Effects - The Dept. 10 AMPED 2 is a floorboard amplifier that packs 100 watts of pure Blackstar tone in a stompbox-sized enclosure that will fit easily on your pedalboard. AMPED 2 was designed to re-create the tone and feel of a traditional tube amp, with three distinct preamp voices — USA, UK, and Classic — for maximum sonic versatility. Three different power amp responses ensure an authentic amp-like feel to match the AMPED 2's killer tone. You get four pedal-style effects, including Drive, Modulation, Delay, and Reverb, plus a high-quality effects loop, MIDI control, and 9V pedal power outputs. To top it off, this guitar amplifier pedal includes Blackstar's next-gen Cab Rig DSP speaker simulation. You can connect Dept. 10 AMPED 2 to an 8- or 16-ohm speaker cabinet, or you can choose to route a studio-quality mic'd-cab tone straight to your DAW via USB-C.

Sonically flexible 100-watt guitar amplifier - At its heart, Dept. 10 AMPED 2 is a great-sounding 100-watt guitar amplifier jam-packed with sonic flexibility. The 3-way Voice switch changes the sound of your preamp. USA was inspired by '60s-era American-style amps coveted for their clean, dynamic sound; it's an ideal pedal platform. UK recalls the much-loved Class A amplifiers that defined the British Invasion, churning out everything from clean to warm to overdriven. Lastly, Classic is based on Blackstar's award-winning cascaded tube overdrive with a traditional British-style passive tone stack — the perfect choice for crunchy rhythms and gritty leads. AMPED 2 also includes a bevy of Power Amp controls. The 3-way Response switch enables you to tailor the amp's feel with EL84, EL34, and 6L6 characteristics. You also get a 3-way Power switch that selects between 100W, 20W, and 1W, allowing you to use AMPED 2 for large-scale gigs, at-home practice, and everything in between.

Four outstanding stompbox-style effects - The Blackstar Dept. 10 AMPED 2 includes four pedal-style effects: Drive, Modulation, Delay, and Reverb. Drive is placed before AMPED 2's preamp section in your signal chain, and includes Boost, Drive, and Fuzz options, plus Drive, Tone, and Level knobs, and a Drive footswitch for toggling the effect on and off. Modulation includes three effect types: Chorus/Flanger, Tremolo, and Phaser, plus a Mod footswitch for engaging and disengaging the effect. Delay includes three effect types: Linear, Analogue, and Shimmer, plus an independent Delay footswitch and a Tap footswitch for synching to the tempo or bpm of a song. Reverb includes three effect types: Room, Spring, and Plate, plus a dedicated Reverb footswitch. Guitarists are duly impressed by the quality of AMPED 2's effects — it's a terrific all-in-one solution for lightweight fly gigs.

Next-generation CabRig speaker simulation - Rather than force you to lug an unwieldy cabinet around, Blackstar loaded the Dept. 10 AMPED 2 with top-notch speaker simulation. Dubbed Cab Rig, AMPED 2's cab sim technology replicates the sound and feel of a mic'd guitar cab with exacting detail. While IR-based speaker simulations provide a realistic snapshot of a raging cab, they often possess inherent latency, as well as phase issues, when you mix more than one together. Cab Rig's advanced speaker simulation algorithm re-creates a speaker, cabinet, mic, and room with zero latency or phase mismatches. You get your choice of cabs and microphones, both on- and off-axis, along with room characteristics, and absolute control over how much or little of this you blend in. And everything can be accessed using Blackstar's powerful Architect software. To top it off, AMPED 2 enables you to route your mic'd-cab sound through a balanced mono XLR output, a stereo TRS headphones output, or through the unit's built-in 4-in/2-out USB-C audio interface. A 3-way selector switch and Level knob offer even more flexibility.

Blackstar Dept. 10 AMPED 2 Guitar Amplifier Pedal Features:

• Gain, Bass, Middle, Treble, and Master knobs give you basic sound-shaping options
• 3-way Voice switch (USA, UK, and Classic) changes the sound of the preamp
• 3-way Response switch tailors the feel of the power amp with EL84, EL34, and 6L6 characteristics
• 3-way Power switch selects between 100W, 20W, and 1W
• 4 footswitchable pedal-style effects: Drive, Modulation, Delay, and Reverb
• Tap footswitch synchronizes effects to the tempo or bpm of a song
• Cab Rig speaker simulation re-creates a speaker, cabinet, mic, and room with zero latency or phase mismatches
• Architect software allows you to deep dive into Cab Rig's features
• Balanced mono XLR output, stereo TRS headphones output, and built-in 4-in/2-out USB-C audio interface
• 3-way Cab Rig selector switch and Level knob offer even more flexibility
• 2 x 9V DC outputs allow powering external pedals up to a combined 500mA
• 8- and 16-ohm speaker cabinet outputs
• Effects loop for integrating your pedalboard and rackmount gear
• MIDI I/O for sending and receiving MIDI CC messages
• Built-in tuner

Tech Specs

• Type: Solid State
• Number of Channels: 2
• Total Power: 100W
• Reverb: Yes
• Effects: 3 x Drive, 3 x Modulation, 3 x Delay, 3 x Reverb
• EQ: 3-band EQ
• Amp Modeling: Yes
• Number of Models: 3 x Valve Response, 3 x Preamp Voices, 3 x Cab Rig Presets
• Inputs: 1 x 1/4"
• Outputs: 1 x 1/4" (out), 1 x XLR (cab sim out), 2 x 1/4" (8 ohm, 16 ohm)
• Headphones: 1 x 1/4" TRS (line out/headphone)
• Effects Loop: 2 x 1/4" TS (+4dB, -10dB)
• MIDI I/O: 2 x 1/8" (in, thru)
• USB: 1 x Type-C (4-channel recording)
• Computer Connectivity: USB
• Software: Architect, CabRig
• Features: USB Audio Interface
• Construction Material: Aluminum Housing
• Power Source: Standard IEC AC cable, 2 x 9V 500mA Power Outputs
• Height: 3.14"
• Width: 11.22"
• Depth: 5.9"
• Weight: 3.88 lbs.
• Manufacturer Part Number: AMPED2

We are Quinlan and Fabish Muncie Music Center, a brick & mortar guitar store in the downtown area of Muncie, Indiana. We are an authorized Blackstar Dealer. If you have any questions about this item or any thing else, just stop in at our facility at 600 S Mulberry St., Muncie, IN 47305. We'd love to get to know you. We're focused on providing great customer service. We're your friends out here.
Our hours are:
Monday - Friday 10am-6pm EST
Saturday 10am-3pm EST

Payment may be made using Reverb payments. We are a brick and mortar store in Muncie, Indiana in business for over 65 years! Ask around/check our feedback and you will find we have a great reputation! Indiana residents pay 7% sales tax.
Even though we have a 14 day return policy, we need to hear from you with any problems within 2 days (48 hours) of receiving your item, so please inspect your item upon arrival.
We are not responsible for any issues after the 48 hour inspection period!
We always do our best to describe items the best we can. Our main goal is customer satisfaction!
Shipping cost is for lower 48 only. Alaska/Hawaii shipping is available but much more expensive. INSURANCE IS MANDATORY THROUGH UPS, WE HAVE ALREADY INCLUDED INSURANCE COST IN THE SHIPPING.
International Buyers
No International Sales. We take pride in well packing our products to make sure they arrive at your door with no problems. Thanks for looking and please check out our other listings!