GVT “ NOS Wire “ Handwound Pickups for Stratocaster ®️ Original Pre CBS 1955 Magnet Wire Ltd. Ed. Anaconda Heavy formvar 1964.

GVT “ NOS Wire “ Handwound Pickups for Stratocaster ®️ Original Pre CBS 1955 Magnet Wire Ltd. Ed. Anaconda Heavy formvar 1964.

This hand-wound vintage collector set for Strat®️ offers an authentic glimpse into the golden era of electric guitar design, meticulously crafted by hand from start to finish. Every component of these pickups, from the wire to the magnets, has been carefully selected and assembled with absolute craftsmanship. Built using NOS (New Old Stock) materials from the 1950s, these pickups capture the essence of the vintage sound that defined the era.

Set No 01 LTD.

• Complete Pickup Set for Strat®️ (64 specs low Overwound Style)
• Hand-Wound Using the Scatter GVT Technique
• Original NOS Anaconda USA magnet wire from the 1950s (1955)
• 43 AWG Magnet Wire with Natural Heavy Formvar Coating, Sourced from Original 50s Spools
• Pristine Condition Magnet Wire, Made in the USA Using Original Anaconda Spools
• Pre-CBS Staggered Rod Magnets with Specially Gauged Alnico
• Polarity Facing Up Towards the Strings: North
• Coil Winding Direction: Counterclockwise
• Bridge DC Resistance: 7.7 k Ohms
• Middle DC Resistance: 7.23 k Ohms
• Neck DC Resistance: 6.95 k Ohms
• With 5% tolerance
• Vintage-Correct Specs for 60s Overwound Model
• Flash Waxx Finish with Old Paraffin Wax
• Includes Installation Screws
• Limited Edition GVT Set No01

To ensure maximum authenticity, these pickups are marked with a blacklight-reactive stamp. Each set includes its Certificate of Authenticity, verifying its origin and craftsmanship.

Capture the authentic vintage sound with this Stratocaster®️ pickup set, a must-have for classic guitar enthusiasts!

About Anaconda wire;

Anaconda Wire and Cable was an important American company specialized in manufacturing high-quality cables and wires for various industries, including electrical, electronics, and mining. The company was primarily known for its production of copper wire and high-resistance cables, suitable for industrial, commercial, and, in some cases, musical applications.

History of Anaconda Wire and Cable

Anaconda Wire and Cable was founded in the late 19th century as a division of Anaconda Copper Mining Company, one of the largest copper producers in the world. While the mining company focused on resource extraction and mining, the Anaconda Wire and Cable division specialized in manufacturing cables, wires, and conductive materials, especially copper and alloys. The company became a leader in the wire industry, particularly in the use of copper for manufacturing magnetic wire, which was crucial in many applications, including electrical components, telecommunications, and more.

Although it started as part of the mining company, over time Anaconda Wire and Cable became independent and focused on producing cables for industrial and commercial applications. Throughout much of the 20th century, the company was one of the most respected brands in this sector.

In 1986, Anaconda Wire and Cable was acquired by General Cable Corporation, which led to the dissolution of the brand and its integration into the cable giant. However, its legacy endures through the quality standards of copper cables and wires that are still recognized today.

Anaconda Magnetic Wire for Guitar Pickups

Anaconda’s magnetic wire is well-known in the guitar industry, especially in the manufacture of pickups, due to its excellent conductivity properties and wear resistance. The type of magnetic wire Anaconda produced, particularly enameled copper wire or wire coated with Formvar, was widely used in pickup manufacturing for the following reasons:

• High Conductivity: Copper is an excellent conductor of electricity, which is crucial for the precise transmission of signals from pickups through the guitar's electrical circuit.
• Formvar Insulation: Formvar-coated wires (a type of insulating coating) were common in Anaconda’s magnetic wire, which helped protect the copper wire and maintain signal clarity, resulting in better sound quality for guitar pickups.
• Durability: Anaconda wire was highly durable and resistant to corrosion, ensuring that pickups made with this wire had a prolonged lifespan without losing quality.
• High Temperature Resistance: Anaconda wire was also known for its ability to withstand high temperatures without degrading performance, which is an important factor in pickup production, where coils can heat up during use.

Reputation in the Music Industry

Anaconda’s magnetic wire, especially the high-quality copper wire with Formvar coating, was highly respected in the guitar industry. Many high-end pickup manufacturers, especially in the 1950s and 1960s, used wire from this brand due to its superior quality. This made pickups made with Anaconda wire highly valued for their warm, dynamic tone.

Although Anaconda Wire and Cable as a brand no longer exists as an independent entity, its legacy lives on through the products it helped create, many of which are still used in various applications, including music. Guitars and their pickups that were made with this wire are considered high-quality, and musicians continue to appreciate the characteristic tones they provide.

In summary, Anaconda Wire and Cable was an influential company in the history of wire and cable manufacturing, and its copper magnetic wire was crucial for many applications, including guitar pickups, due to its excellent conductivity, durability, and ability to produce clear, warm musical tones.

L.F. and his company are believed to have used Anaconda wire in the early production of some of the pickup coils for Pre CBS guitars, particularly during the 1950s. The wire used in PRE CBS pickups at the time was typically magnetic copper wire with Formvar insulation, which is consistent with the type of wire produced by Anaconda Wire and Cable.

The copper wire from Anaconda was known for its excellent conductivity, durability, and ability to retain tone clarity, making it a popular choice for manufacturers of electric guitar pickups. It's important to note that L.F. sourced materials from a variety of suppliers during this period, so while it's possible that Anaconda wire was used in some pre cbs pickups, there may have been variations depending on the time and production batch.

The wire used on pre cbs guitar pickups, often associated with the "blackguard" ® Telecasters ® and early Stratocasters ®, played a crucial role in shaping the distinctive tone that these guitars are known for today. The wire's properties contributed to the crisp, clear, and dynamic sound that became a hallmark of True Vintage L.F. pickups.