Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier NEW! AUTHORIZED DEALER!!!

PRODUCT HIGHLIGHTS

Increases Gain for Low Output Sources
Boosts Signals to +4dB Line Level
Transformer-Balanced XLR Outputs
Versatile Inputs: RCA, 1/4 TRS, 1/8"

The Radial J+4 Balanced Signal Driver is a stereo preamplifier designed to accept unbalanced, low output devices such as instruments, computers, or CD players and boost the signal to a balanced +4dB level.
The J+4 includes a variety of input connectors to accommodate most audio sources; a stereo pair of both 1/4" and RCAs, and a single 1/8" stereo input. The control panel is easy to operate, consisting only of a stereo level control, a high pass filter, and a ground lift. The boosted signal then outputs from a stereo pair of balanced XLRs.
The J+4 features 100% discrete components for optimal signal transfer. Noise is eliminated by combining the advantages of active signal buffering with transformer isolation, resulting in better than 95dB signal to noise ratio. This also ensures hum and buzz caused by ground loops, along with spurious noise from clocking, will not pollute the signal path.
The Radial J+4 is built to handle the extreme rigors of the professional audio world. It delivers exceptional sonic performance, plenty of headroom and ultra low noise making it the ideal addition to any audio system with low output sources.

Boosts Signals to +4dB Balanced Line Level
The J+4 takes a -10dB consumer level audio product, such as an iPod or a DJ mixer, and boosts the signal to +4dB commercial level without adding noise or distortion.

Versatile Input Options
The J+4 has input connectivity for dual 1/4", dual RCA, and a single 1/8" stereo input.

Transformer Isolated
Transformer isolated circuitry eliminates noise caused by ground loops.

In the Box

Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier
3-Year Limited Warranty, Transferable

Circuit Type
Active -10 dB to +4 dB line converter, transformer isolated

Number of Channels
Stereo

Frequency Response
20 Hz to 20,000 Hz (± 2 dB)

Dynamic Range
102 dB

Maximum Input Level
+17 dBu @ 1 kHz, 1% THD+N

Total Harmonic Distortion
0.004% @ 1 kHz, +10 dBu output

Phase Shift
0.5° @ 100 Hz; 4° @ 20 Hz

Input Impedance
10k Ohms, unbalanced

Output Impedance
1.6k Ohms, balanced

Transformer
JS2 Radial custom transformer

HPF
-3 dB @ 100 Hz (12 dB/octave)

Lift
Disconnects XLR pin-1 at isolated output

Input Connections
1/4" x2, RCA x2, 1/8" Stereo x1

Output Connections
XLR (pin-2 hot) x2

Construction
14 gauge steel chassis & outer shell

Finish
Baked enamel

Power
Passive, no power required

Dimensions (W x H x D)
3.3 x 5.0 x 2" (84 x 127 x 48 mm)

Weight
1.55 lbs (0.70 kg)