Redco P2M and P2S Headphone System with Extras, 2010s

I bought this system for a project that never ended up materializing and now it's time for them to go to a new home. This system includes:

(2) Redco P2M - Powered Cue Box, Primary Unit
(7) Redco P2S - Passive Cue Box, Secondary Unit
(1) 50ft Redco TGS-M7 Linking Cable
(3) 25ft Redco TGS-M7 Linking Cables
(5) 15ft Redco TGS-M7 Linking Cables
(5) 10ft Redco TGS-M7 Linking Cables
(13) Sennheiser HD201 Headphones

Everything is essentially new and unused except for three of the P2S units and three of the 10ft linking cables which received very light use. These three P2S units do not include the original boxes, but the others do. The headphones are all new and unused. If purchased new this system would cost over $2800.00.

----------

From the manufacturer

P2M:

The Redco P2M Powered Red Headphone Cue System is a self-powered, daisychainable headphone amplifier system that provides a clean, high powered output capable of powering all modern studio headphones.

The P2M can act as a stand alone stereo cue headphone box, or can be used in conjuction with the P2S Slave Units to daisy chain the same cue signal through the room or facility using 5 pin supplied XLR linking cables.

Each headphone output allows for On/Off, Standard Stereo, or sum Stereo to Left Ear Only use.

The P2M can be mounted directly onto a standard mic stand thread, put onto a table top, or mounted under a table , or 1U Rack space with optional mounting brackets.

**This unit is NOT to be used in combination with the Little Red Cue Box**

P2S

The Redco P2S Powered Red Headphone Cue System Slave Unit is a daisychainable headphone amplifier unit that provides a clean, high powered output capable of powering all modern studio headphones.

The P2S receives its stereo Cue signal from the P2M Master Unit using 5 pin supplied XLR linking cables.

Up to 7 P2S Slaves can be chained from 1 P2M Master.

The P2S also allows for an additional stereo input per box to feed a dedicated additional stereo Cue to just that unit in the event a performer needs more of a certain signal than everyone else in the chain. 

Each headphone output allows for On/Off, Standard Stereo, or sum Stereo to Left Ear Only use.

The P2S can be mounted directly onto a standard mic stand thread, put onto a table top, or mounted under a table , or 1U Rack space with optional mounting brackets.