Selling a well loved and used Allen & Heath GL2000. Only ever had careful use in a studio. Please ask if any more information or photos are required. All in good working order. Local pick up preferred. Buyer to arrange own courier if desired as there is no box.

This GL2000 is a 4 group sound reinforcement console with Group / Aux mode switching allowing it to be used in front-of-house, monitoring and combined roles. 

Like the everlasting durability of the theatre built in the cliff, the GL2000 was designed for a long hard life. The result is a perfectly rigid mechanical design with superb sonic characteristics. The package would not be complete without the hallmarks of A&H design philosophy; a proven four band semi parametric EQ, eight additional inputs on every frame size, expandability, all in an uncompromised Dual Function console. So if you expect your console to work hard and stay functionally flexible, then you are very likely to enjoy the benefits offered in the GL2000 range. 

The bonus of having more inputs than expected is always an advantage. Each fram size in the GL2000 range has eight extra inputs. 

The two swept mid bands have a wide frequency range with exactly the right Q. It's a proven, exhaustively field tested EQ taken from the existing GL2 range. 

The dual funcion specification of this Allen & Heath console is unique. For true flexibility, using only a few front panel switches, the whole console becomes a dedicated monitor board. Couple that with its ability to selectively switch only as many of these outputs as needed, and the GL2000 is truly placed in a class of its own. 

There are situations where a particular performance will demand even more inputs. Another unique design marque of the GL2000 is the SYS-LINK buss interconnect system. This gives the engineer exactly the degree of expandable flexibility needed at a fraction of the cost of other alternatives. 

The challenge was to make the rigid construction of the GL2000 light enough for one person to carry to any location. And it was accomplished, weighing under 50 pounds.

Every frame size has two fully featured stereo inputs. These, along with the two stereo FX returns amount to eight additional inputs. Each stereo input includes the same wide ranging mic pre-amp as the mono inputs, a four band EQ and 6 auxiliary sends. Every input channel is designed on a single card. This improves service, reduces down time and is proven to add to the general durability and life span of the console. 

As with the mono and stereo input channels, all the circuits of the master selection are built on vertically mounted circuit boards for proved reliability and ease of service. An uncluttered layout and common sense ergonomics mean that you can mix with confidence from day one. 

SYS-Link is the proprietary buss interconnect option that allows you to join two or more consoles together electronically. 

Easy to use intuitive layout. 

Features:

• 
  
• 24 channel with 32 inputs to the mix respectively. 
• 
  
• SYS-LINK buss expander option.
• 
  
• 2 stereo mic/line channels as standard.
• 
  
• L R outputs on balanced XLR with inserts.
• 
  
• Mono sum output on jack output.
• 
  
• 4 groups with outputs available on balanced XLR with inserts.
• 
  
• Subgrouping to L R with pan control and switch for each group.
• 
  
• 6 independent aux sends on jack outputs.
• 
  
• 2 stereo returns on faders with Eq and routing.
• 
  
• Mode switching to convert console to on-stage monitor with 6 sends on balanced XLR with inserts. Mode switching converts mono output to monitor engineers 'listen' wedge.
• 
  
• 2-track record and replay with level controls.
• 
  
• Talkback to all aux sends selected in pairs.
• 
  
• Advanced channel features including +48V, phase switch, lo-cut filter, meter and insert. 4 band 2 sweep EQ with wide ranging frequency sweep and +/-15dB boost/cut. Pre-post aux switching with additional internal link options.
• 
  
• High performance circuitry used for low noise and sonic purity.
• 
  
• High quality, proven reliable parts used throughout.
• 
  
• Rear mounted connectors, comfortable soft armrest, wide write-on strips.
• 
  
• Rugged metal construction for on-the-road rigidity, easily flightcased and transported. Removeable steel base for easy access to individual circuit assemblies.