SWR Workingman's 4x10T 400-Watt 4 x 10" Bass Guitar Amplifier Extension Cabinet

Used - Very Good Condition

• Cabinet, Chassis, and Control Panel: the cabinet is structurally intact; the midnight blue carpet covering the top, bottom, back, and sides picks up lint, fuzz, and debris pretty easily, plus it shows some wear and fraying, primarily on the sides and back; the handles are securely attached to the cabinet and show some light scuff marks, scratches, and paint loss; the metal grille cover is bent and has a few small scratches and nicks in it as does the logo plate; the corner protectors show some wear and tear on them from normal use; the caster receptors are intact, but the casters are missing; the connection panel looks almost flawless except for an obvious scratch through the barcode
• Switch and Connectors: both connectors are intact and function properly and the Tweeter switch moves nice and smoothly
• Speakers: the speakers sound fantastic
• Includes: electric bass guitar amplifier extension cabinet (casters, cover, and manual not included)

Features

• 4 x 10" woofers
• 1 x aftermarket Pyle Pyle Driver MH1040 speaker, 1 x aftermarket Peavey Sheffield 121-8 speaker, and 2 x Eminence speakers that may or may not be original
• 1 x Le-Son TLX-1 piezo tweeter
• 400-watts power handling
• Impedance: 8 ohms
• Crossover frequency: 5kHz
• Frequency response: 100dB SPL at 1W1M (-3dB at 50 Hz and 18 kHZ)
• Front slot port
• Spring-loaded rubber grip handles
• Midnight blue carpet covering
• Stack lock corner protectors
• Vibration free grille (midnight blue finish)
• High quality metal input panel
• 1/4" In and Out jacks
• Tweeter Full/Off switch
• Dimensions: 23"W x 25.25"H x 18.375"D
• Weight: 97 lbs.
• Made in Sun Valley, California, U.S.A.

The Workingman's 4x10T is an 8 Ohm, 400 watt, 4 x 10" speaker enclosure with a tweeter. At least two of the speakers in this cab are not original, but this thing will still pump out some massive bass tones for you! It is currently loaded with a Pyle Pyle Driver MH1040, Peavey Sheffield 121-8, and two Eminence speakers (these may or may not be original). The internal (passive) crossover of the WorkingMan's 4x10T divides the incoming signal into 2 frequency bands. The crossover point is 5kHz (frequencies above 5kHz are sent to the tweeter, frequencies below 5kHz are sent to the 10 in. speakers). Although they are not included, you could easily add your own casters enabling you to move this powerhouse bass cab effortlessly from rehearsal, to studio, to gig, and back again!

DASBKa---SDK.EDG