ENDROLL Geminy Hod+Mod GHM-1 [SN PRT-028] (07/15)

ENDROLL / Geminy Hod+Mod GHM-1
High-end 2-in-1 overdrive pedal from "pedalworks ENDROLL" that top musicians are beginning to use!

pedalworks ENDROLL" is a high-end 2-in-1 overdrive pedal created by Takashi Yamaguchi, a sound product designer who has released many effect pedals and electronic products such as "VOCU", "VIZION", "ZO-3", etc., for use by professional musicians on the front line. Mr. Takashi Yamaguchi, a sound product designer who has created many effects pedals and electronic products such as the ZO-3, designed this brand of effect pedals to be used by leading professional musicians in the field.

The "MOD-1/Mostly OverDrive" and "HOD-1/HalfWay OverDrive" overdrive pedals designed by Mr. Yamaguchi have been highly acclaimed by many musicians since the prototype stage, and are combined in one 2-in-1 overdrive pedal.
Inside the 2-in-1 housing, the "Mostly OverDrive" is connected to the "HalfWay OverDrive" in that order. The 2-in-1 pedal has a wide range of possibilities, from main drive to booster, and is ideal for creating the ideal overdrive sound that the player envisions. It is the ideal overdrive pedal for creating the ideal overdrive sound envisioned by the player.
Thanks to the brand's "superior circuit design" and "sound tuning," the GHM-1 has a very wide strike zone for an overdrive pedal, making it easy to find the sweet spot regardless of the type of instrument, such as guitar or bass, to which it is connected. Yet it is low noise.

The features of each overdrive are as follows. Quoting from the manufacturer's description
The Half Way OverDrive creates a negative voltage internally and uses ground as the circuit reference to minimize noise caused by fluctuating bias voltage, while the internal drive voltage is a two-channel with a toggle switch, and the low voltage side is adjustable with an internal semi-fixed resistor (Low Voltage Adjustment). The Lo control and Hi control can be used to adjust the tone curve.
Mostly OverDrive provides low voltage distortion by controlling the voltage below the input voltage with an internal semi-fixed resistor with asymmetric distortion in the distortion channel. (Because it goes through a voltage control circuit, it is not equal to the input voltage, even at maximum.) A Lo control and Hi control (internal) are provided before the tone circuit and can be used to flavor the tone curve.
The distortion channel has three modes: "Di" mode for asymmetrical distortion, "Nature mode" for upper and lower power supply voltage limits with the clip open, and "LED mode" for symmetrical distortion, which can be switched with the clip switch. Individual effects can be turned on and off with the footswitch.
Item rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: PRT-028
Case: Box
Manual: Yes
Other accessories: No
Note: Other accessories are shown in the picture only.

-----------------------------
Please read carefully

* This item is only available as a one-of-a-kind item.

* Due to the fact that this item is listed in stores and multiple malls, there is a time lag in sales and inventory status, and it is not real-time.
Therefore, there is a possibility that the item has already been sold at the time of your order. We apologize in advance for any inconvenience this may cause.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.