MXL V76T TUBE CONDENSER MICROPHONE KIT

v76t Cardioid Tube Condenser Microphone made in California. (One left)
These mic's were listed with the MXL premium mic lineup page of 2012. There were not very many made and even though the MXL website has these mics available to look up and verify specs when using their search engine, their tech had never heard of them. These are very cool mics but they didn't make many and they didn't make them for very long. From what I gathered, they cost too much to make so they were discontinued and replaced by the cheaper MXL960 mics. You can go to the mxlmics website and use their search to find all the info there. 
I bought 6 a long time back and have 4 unopened, brand new mics with all the extras, straight from the factory. I forgot I had them until not long ago. Be aware that these are shipped in boxes that originally said MXL 992/993 but had a label placed over that to say MXL V76T instead. Like I said, these were a really small run of mics that they made. 
So - what MXL had to say for the mics is listed below with all the specs. 
======================
The MXL V76T is like time travel for singers. This tube microphone gives vocals a vintage sound. It’s smooth and solid in the middle, with overtones that make recordings sparkle. It’s the kind of tone that makes music from the past so classic. The V76T has an upfront presence that lands in the right place in a mix, no matter which kind of music you’re making.
• Tube mic that enhances vocals with rich harmonics • Balanced output for a smooth, solid midrange • 12AT7 dual-triode tube that delivers vintage tone • Great up-front presence that sits well in a mix • Excellent for recording R&B, rock, pop and country
Includes high-isolation shockmount plus another hard ring mount, power supply, 7-pin power cable, windscreen and carrying case.
Type: Vacuum tube condenser
Capsule: Size 1”/25mm / 6 micron
Polar Pattern Cardioid
Frequency Response 30Hz - 20kHz
Max SPL for .5% THD 122 dB 138 dB
Sensitivity 38 MV/pa
Output Impedance 200 ohms
Power Requirements 120/240V 50/60hz
Equivalent Noise 18 dB (A-weighted IEC 268-4)
Weight 1.15 lbs/525g Size 1.85”x 7”/48mm x 180mm
Metal Finish Nickel Plated ---------
 SHIPPING:
I will gladly ship to anywhere provided that the buyer will pay for all shipping costs. The mic is boxed and ready to go so there will be no extra charges on my end. Only the actual cost of shipping and if you have taxes on your end you'll cover that too.