Audio Technica AT859QMLx - Black

Mic fully functional when removed from service in March 2024 from a fixed install. Mic has minor paint chipping on XLR base from being installed/removed when necessary (as seen in the picture). No windscreen included.

AT859QMLx

• Designed for high-quality sound reinforcement, professional recording and broadcasting
• Small-diameter, alternating gooseneck design permits highly flexible positioning
• Plugs into any standard XLRF-type surface or cable connector
• Overall length of 18.50" (470.0 mm)

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 50-18,000 Hz
• Low Frequency Roll Off: 150 Hz, 6 dB/octave
• Open Circuit Sensitivity: -46 dB (5.0 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 140 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range; 111 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 9-52V DC, 2 mA typical
• Switches: Flat, roll-off
• Weight: 4.2 oz (120 g)
• Dimensions: 18.50" (470.0 mm) long, 0.48" (12.3 mm) head diameter, 0.83" (21.0 mm) base diameter
• Output Connector: Integral 3-pin XLRM-type