NANO Modules VCV Random CV Generator Module

CV Random is a random CV generator with 4 types of randomness and a triggerable sample-and-hold function. Sliders allow you to set the internal clock tempo (RATE), shape the probability of triggering (PROB), blend old with new values (RND) and set the shape of all four random outputs (SHAPE). 4 different sliders RATE Sets the tempo of the internal clock. The CV input below the slider adjusts the clock rate, with 1V/oct calibration when the CV attenuverter is 100%. Upon each clock trigger, the RATE slider light blinks, and there is a chance for the internal random source to generate a new value. PROB This probability is set by the PROB slider, and if a new value was generated, the PROB slider light blinks and a pulse is emitted from the TRIG output. RND When the internal random source generates a new value, it mixes the previous value with a random value, with an amount specified by the RND slider. SHAPE The SHAPE slider sets the shape of all four random outputs. At its lowest position (0%), all outputs immediately jump to the new random value (the target value) when the clock is triggered. At non-zero positions, the outputs interpolate between the previous and the target value, using a different behaviour for each output. Internal random clock source Whenever the clock activates, the RATE slider's light flashes. At the same time, there's a chance that the internal random source will create a new value, depending on the PROB slider's setting. If it does create a new value, the PROB slider's light flashes too, and a pulse comes out of the TRIG output. External IN & TRIG inputs If the TRIG input is patched, the RATE slider is ignored, and the internal clock is only triggered when an external trigger is received. The PROB slider is used to filter this trigger by applying some probability. Self-modulation Thanks to a switch in the back of the module, you can normalize the LIN output to the 4 CV inputs and adjust the amount of modulation for each parameter with the attenuverters. This adds another layer of randomness to your results, enabling more dynamic and unpredictable outcomes. SHAPE Outputs The STEP output jumps to the new value in one step at 0% SHAPE, and divides the transition into 16 steps at 100% SHAPE. The LIN output immediately reaches the new value at 0% SHAPE, and takes the whole clock cycle to do so at 100% SHAPE, staying constant in between. The EXP output shifts exponentially, becoming linear at 100% SHAPE, with its pace adjusted by the SHAPE slider. The SMTH output transitions smoothly, with the speed controlled by the SHAPE setting, holding at the target until the cycle ends. Specifications Dimensions 10HP - 50×128,5mm Current 63 mA +12V / 11 mA -12V / 0 mA +5V Input & Output Signals +/-10V Impedance Input 10k - Output 10k Materials PCB and Panel - FR4 1,6mm Depth 40mm including connectors (Skiff friendly)