When you're playing smaller venues but still need that chest-thumping low end, the Mini-Tremor hits the sweet spot between footprint and impact. This powered 12" sub fills the bass gap that your mains leave behind, whether you're running 10" tops at a coffee shop or need extra foundation for a 150-person wedding reception.

The 350-watt RMS Class D amp drives a proper 12" woofer with a 2" voice coil and hefty 50-oz magnet, getting you clean bass down to 45 Hz. What makes this practical is the variable low-pass filter — you can dial the crossover anywhere from 40-150 Hz to match whatever mains you're running. No guessing, no separate crossover rack gear.

At 43 pounds and compact dimensions, it's actually manageable on solo gigs. The recessed handles work, the pole mount socket gives you setup flexibility, and the XLR throughputs let you daisy-chain to your mains without extra cables or splitters. The ported design gives you more output than you'd expect from this size cabinet.

This isn't a monster sub for outdoor festivals — it's designed for venues where space matters but you still need that low-end foundation. Coffee houses, small clubs, acoustic duo gigs where you want to feel the upright bass, DJ sets in tighter spaces. It does what 12" subs do well: controlled, musical bass that doesn't muddy up your mix.

Bottom line: If you need sub-bass in spaces too small for an 18" cannon but too big for hoping your 12" mains handle everything, the Mini-Tremor delivers the right amount of low end without taking over your vehicle or the room.

Technical Specifications

• Power (RMS): 350 Watts
• Power (Peak): 700 Watts
• Amplifier Type: Class D
• Woofer: 12" with 2" Voice Coil, 50 oz Magnet
• Frequency Response: 45 Hz - 300 Hz
• Sensitivity: 95 dB
• Impedance: 8 Ohms
• Low Pass Filter: 40 Hz - 150 Hz (Variable)
• Inputs: XLR Combo
• Outputs: Male XLR
• Cabinet: 5/8" Plywood Front Panel and MDF
• Covering: Black Carpet with Black Metal Corners
• Dimensions: 18.5" H x 15.75" W x 15.75" D
• Weight: 43 lbs
• Features: Ported Design, Pole Mount, Full Metal Grill
• Warranty: One Year
• Recommended For: Small venues, DJ setups, compact PA systems

Frequently Asked Questions

What size venue can the Mini-Tremor actually handle?

Think intimate spaces up to 150 people — coffee shops, small wedding receptions, club DJ sets where you're not competing with a full band. The 700-watt peak gives you enough impact for these rooms without overwhelming them. If you're regularly doing larger gigs, you'll want to pair two of these or step up to a 15" or 18" model.

How do I connect this to my existing PA setup?

Run an XLR from your mixer's aux send or dedicated sub output to the Mini-Tremor's combo input. Then use the XLR output to feed your main speakers — this eliminates needing a separate crossover since the sub handles the filtering internally. Just one extra cable in your signal chain.

Where should I set the crossover frequency?

Start around 80-100 Hz and adjust by ear. If you're running smaller mains (10" or 12"), you might push it up to 120 Hz. With bigger mains that have decent low-end response, try 70-80 Hz. The goal is seamless integration where you feel the sub's impact but can't locate where the bass is coming from.

Do I really need a sub if my mains already have 12" or 15" woofers?

Yes, because dedicated sub duty makes everything cleaner. When your mains don't have to handle deep bass, they focus on mids and vocals with less distortion. You get tighter bass response and clearer vocal reproduction. Plus, positioning flexibility — you can put the sub on the floor for better coupling while keeping your mains at ear level.