HOTONE Guitar Multi Effects Processor Multi Effects Pedal Touch Screen Guitar Bass Amp Modeling IR Cabinets Simulation Guitar Effects Pedal Multi FX Processor Ampero II Stomp
“Upgrade” is more than a 7-letter word. It embodies the continuation and evolvement beneath the surface, and embraces revolution and creativity outside the box. It’s what Ampero II Stomp does. Throughout years of grinding to establish its core technologies from empirical practice, Hotone team proudly presents this soul partner for your sophisticated taste in the sound of the music.
12. 13. AUX IN & PHONES: 1/8" stereo aux input and phones output
14. Display Screen: Displays unit current status. Use the touchscreen to select effects, edit patches, and make tone adjustments
15. Quick Access Knobs: Use to adjust parameters on the lower part of the screen
16. Footswitches: Use to change patches, turn effects on/off, set tap tempo, etc.
17. Device Lock Button: Used to lock or unlock the device
New Station for Signal Processing
Ampero II Stomp implements the brand new tri-core digital platform and independent AD/DA, combined with our more advanced CDCM HD and F.I.R.E modeling technology, creating more musically dynamic and vivid tones.
More Tonal Variations
Ampero II Stomp introduces a highly customizable dual effects chain supporting multiple serial/parallel signal routing, up to 12 effects modules can be used simultaneously. Try it as you see fit. Upgraded effects library delivers 400+ effects and supports up to 2048 IR sampling points for better tonal resolution.
Welcome “Aboard”
Stereo I/O jack and stereo FX Loop jack, flexible support 9-18V DC power supply, lighter and smaller design, all these features point to Ampero II Stomp not only can be used as an independent multi-effects processor, but also can be an important member of your pedalboard.
8-In/8-Out Audio Interface
Good news for you all artists, Ampero II Stomp with the 8-in/8-out USB audio interface function will sure lend you a helping hand. Whether you want to monitor wet and record dry, or record wet and dry at the same time, and of course reamp, which has been a trend, you got it all in Ampero II Stomp.
Stereo Looper & Tuner
A built-in stereo looper supports max. 60 seconds stereo recording, back up by supplemental yet necessary functions such as undo/redo, 1/2 speed, reverse record/play and more. Built-in sensitive and practical tuner. Adjustable pitch, ranging from 432Hz to 447Hz. The tuner mode can be selected as Bypass, Mute, Through.
Compatible Win/Mac Software
Connect to your desktop or laptop and launch the editor software, with more specific effects descriptions, more straightforward preset editing and more effective patch management, you’ll find the information you need with ultra-convenience.
Touchscreen with Smoother Navigation
Ampero II Stomp is imbued with the fresh UI design to make things more accessible. Besides the touchscreen, editing overall settings and switching patches can be also managed with ease.
Specifications
Effects Digital Audio Signal Processing: 24-bit depth, 44.1kHz sample rate
Frequency Response: 20Hz – 20kHz ± 1dB
Dynamic Range: Max. 127dB (digital to analog)
Inputs: Two 1/4″ Tip Sleeve (TS) instrument jacks with individual input mode selector One 1/8″ Stereo Auxiliary In (Aux In) jack One 1/4″ Tip Ring Sleeve (TRS) expression pedal/momentary footswitch input (EXP/CTRL) jack One 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo FX loop return jack One Standard 5 pin MIDI input jack
Outputs: Two 1/4″ Tip Ring Sleeve (TRS) balanced stereo output jacks One 1/4″ Tip Ring Sleeve (TRS) unbalanced stereo FX loop send jack One 1/8″ stereo
headphones output jack One standard 5 pin MIDI output jack
Input Impedance: Input: E.GT: 1MΩ; A.GT: 4.7MΩ; LINE: 10kΩ FX Loop Return: 100kΩ Aux In: 10kΩ
Output Impedance: Output: 1KΩ FX Loop Send: 1KΩ Headphones: 47Ω
Input Level: Input: -17.78dBu (Nominal); 14.5dBu (Max) FX Loop Return: -17.78dBu (Nominal); 14.5dBu (Max) Aux In: -17.78dBu (Nominal); 20dBu (Max)
