Seismic Connect - Powered 8 Inch Portable 2-Way Compact PA Speaker with Rechargeable Battery - All-In-One PA System

The Seismic Connect is what happens when someone actually listens to what gigging musicians need: a portable PA that doesn't suck and won't die on you mid-set. This 8-inch powered speaker runs on battery power for over 4 hours, handles up to 150 people indoors or 100 outdoors, and weighs just 15.5 pounds. That means you can actually carry it to the gig without throwing out your back.

What makes this thing work for real-world situations is the built-in 3-channel mixer. You've got two XLR-1/4" combo inputs with proper mic preamps, plus aux and RCA inputs for backing tracks. The DSP isn't just marketing fluff either—the four modes (Music, Speech, Monitor, Sub) actually sound different and serve different purposes. The feedback eliminator and reverb are surprisingly usable, and the 2-band EQ per channel gives you enough control to fix most room problems without needing an external board.

The 100W RMS through an 8-inch woofer and 1-inch titanium tweeter gets loud enough for coffee shops, small clubs, and outdoor acoustic sets. It's not going to blow the roof off a warehouse, but it'll cut through conversation and handle vocals with clarity. The Bluetooth 5.0 works reliably for streaming backing tracks, and the TWS feature lets you pair two units for stereo or just more volume when you need it.

Where this shines is setup speed and reliability. Pole mount, floor wedge, or monitor position—it's stable in all three. The injection-molded cabinet feels solid enough to survive normal gigging abuse, and the Class D amp stays cool even when you're pushing it. This isn't studio-grade audio, but it's clean, predictable sound that won't embarrass you at the gig.

Bottom line: If you need portable PA that covers small to medium venues, sets up fast, and doesn't require an engineering degree to operate, the Connect delivers exactly what it promises without the usual compromises.

Technical Specifications

• Power (Peak): LF: 140W + HF: 60W (200W total)
• Power (RMS): LF: 70W + HF: 30W (100W total)
• Amplifier Type: Class D
• Woofer: 8-inch
• HF Driver: 1-inch titanium compression driver
• Frequency Response: 60Hz - 19kHz
• Max SPL: 115 dB
• THD: <0.01% (20Hz - 20kHz)
• DSP: 48kHz sampling, crossover, limiter, reverb, EQ
• DSP Modes: Music, Speech, Monitor, Sub
• Inputs: 2x XLR-1/4" combo, 1x 1/8" TRS, RCA
• Outputs: 1x XLR mix out
• Connectivity: Bluetooth 5.0, TWS (True Wireless Stereo)
• Onboard Mixer: 3-channel with 2 mic preamps, 2-band EQ
• Effects: Bass boost, feedback eliminator, reverb, talk over
• Battery: 11.1V 6.6AH lithium-ion, 4+ hour runtime
• AC Input: 100-240V, 50/60Hz
• Cabinet: Injection molded polypropylene
• Mounting: 1-3/8" pole mount, floor, monitor wedge
• Dimensions: 11" x 10.5" x 15.5"
• Weight: 15.5 lbs
• Warranty: One year
• Recommended For: Portable performances, presentations, fitness classes, jam sessions

Frequently Asked Questions

Will this actually handle outdoor gigs?

Up to about 100 people outdoors, yes. The 115 dB max SPL and 100W RMS give you enough headroom for acoustic sets, singer-songwriter gigs, or small outdoor events. For full bands or larger crowds, you'll want to pair two units using TWS or step up to bigger speakers. Wind and ambient noise will eat into your effective range, so plan accordingly.

How's the battery life in real-world use?

You'll get 4+ hours of solid runtime at moderate volumes—enough for most acoustic gigs or speaking events. If you're cranking it to 11 for a full band, expect closer to 3 hours. The good news is you can run it plugged in while the battery charges, so you're not stuck if you forget to charge between gigs.

Does the built-in mixer actually work or do I need an external board?

The 3-channel mixer handles most portable gigs just fine. Two combo inputs with real mic preamps, individual 2-band EQ, and effects that don't sound like garbage. You can plug in two mics, add backing tracks via Bluetooth or aux, and control everything from the speaker. For complex setups or more than two mics, you'll still want an external mixer.

Can I use this as a stage monitor?

Absolutely. The Monitor DSP mode is specifically tuned for wedge use, and the angled cabinet design works well on the floor. The XLR mix out lets you daisy-chain to other speakers or send signal to FOH. At 15.5 pounds, it's light enough to move around between soundcheck and showtime without drama.