Saturnworks Aux Switch B Pedal with Clickless Soft Touch Momentary Switches - Replaces the Digitech FS3X, FS300, FS3, etc. - Handcrafted in California

Aux switches are 3-button footswitches used to control Eventide, Digitech, and many other devices.

The aux switch replaces the Digitech FS3X and Digitech FS300, with three buttons for ‘up,’ ‘down,’ and ‘mode’ (tip, ring, and tip+ring) functions.

Upgraded soft touch momentary switches! Starting in 2021, we were able to source a new higher quality soft touch momentary switch for our soft touch momentary switch applications. Our new switch is both quieter and beefier than any other soft touch momentary switch we’ve seen on the market.

Are there cheaper aux switches out there? Probably. Are their components (switches and jacks) as high quality as ours? Not likely.

The aux switch can be used as a controller for the EHX Grand Canyon, the EHX Superego+, the EHX 720 Looper, the Eventide Timefactor, or any other device that specs a normally open switch with a tip, ring, tip + ring configuration as an external controller. It also replaces the TC Helicon Switch-3. 

The aux switch must be connected using a TRS (stereo) 1/4" patch cable (not included).

The Saturnworks aux switch features boutique-grade components, including:

• Top quality soft-touch momentary footswitches that are both quiet and beefy.
• A heavy duty Neutrik 1/4" TRS jack.
• A durable 4.4" x 2.4" (1590B size) cast-aluminum enclosure. 
• High quality wire made in the USA. 
• A 1-year limited warranty against parts and manufacturing defects. See saturnworkspedals.com/faq for warranty terms and conditions.  
• Handcrafted and bench-tested in California, USA. 

Check out saturnworkspedals.com for the full Saturnworks lineup.