The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn.

The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a bluetooth source or alternatively a 1/8" AUX input jack.

Each channel has an adjustable level control and a three-band EQ section. There is a balanced output, a male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters, are accessed via a one-knob selector.

Features:

- Two-way bi-amped sound reinforcement enclosure

- RX14 compression driver, with 1.4 inch titanium diaphragm (PVXp 15 and PVXp 12) or RX10 compression driver, with 1 inch titanium diaphragm (PVXp 10)

- Reliable fan-cooled power amps with DSP protection

- Total of 980W peak dynamic power (PVXp 15 and PVXp 12) or total of 520W peak dynamic power (PVXp 10)

- DSP control for precise crossover, EQ and limiting functions

- Bluetooth input is via a dedicated input channel

- Mix/Thru Output is via a male XLR jack

- Durable plastic injection-molded trapezoidal enclosure

- Extra angled section on right side allows floor monitor use

- Top, bottom and right side flying point inserts (PVXp 15 and PVXp 12) or top and bottom flying point inserts (PVXp 10)

- Full-coverage heavy-duty perforated steel grilles, with powder-coat finish

- Heavy-duty woofer (15" for PVXp 15, 12" for PVXp 12, or 10" for PVXp 10) with 2 3/8" voice coil & 50 oz. magnet

- DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision

- Peavey's Quadratic Throat Waveguide technology, 100 by 50 degree coverage (PVXp 15 and PVXp 12) or 100 by 60 degree cover coverage (PVXp 10)

- Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads

- Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input

- Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack

- Each channel has a level control and a 3-band EQ section to adjust and shape the input signals

- Pole mount molded-in for 1 3/8" diameter poles