When you need a complete PA setup that won't break the bank but can still fill a room, this SA-15TPKG1 package gets the job done. You're getting two 15" two-way speakers with tripod stands — everything you need to roll into a venue and start playing. Each cabinet pushes 350 watts RMS through a 15" woofer and 1.5" titanium compression driver, giving you enough headroom for live bands, DJ sets, or corporate events up to 300 people.

The 15" drivers deliver solid low-end punch without needing a subwoofer for most gigs. The 45Hz-20kHz response covers your vocals, instruments, and backing tracks with enough bass to keep dancers moving. At 96 dB sensitivity and 8-ohm impedance, these speakers work efficiently with most power amps or powered mixers. The dual-ported cabinet design helps extend the low frequencies, while the crossover includes tweeter protection to prevent blown drivers when things get loud.

Build quality is where these speakers earn their keep on the road. The 5/8" plywood construction with black carpet finish handles regular transport and venue setup. Recessed handles make load-in easier, and metal corners protect against the inevitable bumps and drops. The included steel tripod stands extend up to 72" and support 200 pounds each — they're built to handle repeated setup and teardown.

Connectivity is straightforward with dual 1/4" and Speakon inputs on each cabinet. You can daisy-chain additional speakers if you need more coverage, and the passive design means you control the amplification. Whether you're running a powered mixer or separate power amp, these speakers interface cleanly with standard PA gear.

Bottom line: If you need a reliable PA package for small to mid-size venues without the premium price tag, this setup delivers consistent performance for live bands, DJ gigs, and events up to 300 people.

Technical Specifications

• Power (RMS): 350 watts
• Power (Peak): 700 watts
• Woofer: 15" with 50oz magnet, 2.5" Kapton voice coil
• HF Driver: 1.5" titanium with 10oz magnet, 1" throat
• Frequency Response: 45Hz - 20kHz
• Sensitivity: 96 dB
• Impedance: 8 ohms
• Crossover: 12/18dB per octave at 3kHz with tweeter protection
• Inputs: Dual 1/4" and dual Speakon per cabinet
• Cabinet: 5/8" plywood with black carpet, metal corners
• Dimensions: 28"H x 18"W x 15"D
• Stand Height: Up to 72"
• Stand Capacity: 200 lbs each
• What's in Box: 2x SA-15T speakers, 2x tripod stands
• Warranty: 1 year
• Recommended For: Live bands, DJ gigs, venues up to 300 people

Frequently Asked Questions

What size venues work best with this speaker package?

These 15" speakers handle venues up to 300 people effectively, including small to mid-size clubs, outdoor events, wedding receptions, and church sanctuaries. For larger crowds or outdoor festivals exceeding 300 people, you'll want to add a subwoofer or step up to a larger PA system.

What cables and equipment do I need to connect these speakers?

You'll need either 1/4" speaker cables or Speakon cables to connect from your power amplifier or powered mixer to each speaker. Each cabinet has dual inputs of both types, so you can daisy-chain additional speakers if needed. These are passive speakers, so you must provide amplification through a separate power amp or powered mixer.

How much power do I need from my amplifier?

These 8-ohm speakers handle 350 watts RMS each, so you'll want an amplifier that provides 300-400 watts per channel into 8 ohms for optimal performance. Running less power is fine but may limit maximum volume, while significantly overpowering can damage the drivers if you're not careful with gain settings.

Do I need a subwoofer with these 15" speakers?

The 15" woofers provide solid low-end response down to 45Hz, which covers most live music and DJ applications without a subwoofer. However, if you're playing bass-heavy electronic music, hip-hop, or want extra punch for large outdoor events, adding a powered subwoofer will enhance the low-frequency impact and free up the mains to focus on vocals and instruments.