When you're on stage and can't hear yourself in the mix, everything falls apart. These SA-15MT-PW powered wedges solve that problem with 400 watts RMS driving a 15-inch woofer and 1.35-inch titanium compression driver. You get vocal clarity that cuts through the band mix plus enough low-end presence to hear your bass guitar or kick drum fundamentals.

The 125 dB maximum SPL handles everything from coffee shop acoustic sets to full rock band rehearsals. That 2.0 kHz crossover keeps vocals sitting naturally without the harsh midrange spike you get from cheaper monitors. The three-band EQ on each monitor means your vocalist can dial in brightness while your bassist adds low-end punch - no compromise needed.

At 41.8 pounds each with recessed handles, they're hefty enough to stay put during energetic performances but still manageable for load-in. The wedge angle fires sound up at your ears instead of out into the room, so you hear yourself without adding to stage volume that bleeds into audience mics.

XLR loop-through outputs let you daisy-chain multiple monitors from one mixer send, which saves you aux outputs when you're running a small board. The 3.5mm input is handy for solo performers who want to monitor backing tracks directly from a phone.

Bottom line: These are solid workhorse monitors that deliver clear vocal monitoring and full-range sound for small to medium venues without breaking the budget.

Technical Specifications

• Power (RMS): 400 watts each
• Power (Peak): 800 watts each
• Amplifier Type: Class D
• Woofer: 15" with 50 oz magnet, 2.5" voice coil
• HF Driver: 1.35" titanium compression driver
• Frequency Response: 35 Hz - 20 kHz
• Max SPL: 125 dB
• Sensitivity: 93 dB
• Impedance: 4 ohms
• Crossover: 2.0 kHz
• THD: ≤0.05%
• Inputs: XLR female, 3.5mm auxiliary
• Outputs: XLR male loop-through
• Onboard Controls: 3-band EQ (treble, mid, bass), gain control
• Cabinet: MDF with 5/8" plywood front, black carpet covering
• Dimensions: 28.5" H × 18.9" W × 21.1" D
• Weight: 41.8 lbs each
• Power Requirements: 110-120V or 220-240V (switchable)
• Warranty: One year
• Recommended For: Live sound monitoring, stages, rehearsal spaces

Frequently Asked Questions

How loud do these get and what size room can they handle?

Each monitor delivers 125 dB maximum SPL, which is plenty for stages and venues up to 200 people. They'll cut through a full band mix while keeping vocals clear. For larger venues or outdoor gigs, add more monitors rather than pushing these past their limits.

What cables do I need to hook these up?

Standard XLR mic cables from your mixer's monitor sends to the wedges. The XLR loop-through outputs let you daisy-chain multiple monitors from one mixer output using additional XLR cables. Power cables come included.

Can I use these as main speakers instead of monitors?

You could in a pinch, but they're designed as floor monitors. The wedge angle shoots sound upward toward performers, not outward toward an audience. They work as mains only in very small rooms or if you tilt them back.

Do I need a subwoofer with these?

The 15-inch drivers handle bass guitar and kick drum fundamentals down to 35 Hz, so most bands won't need a sub for monitoring. You might want one if you're monitoring electronic music with heavy sub-bass content, but these cover typical band monitoring needs solo.