When you're on stage and can't hear yourself in the mix, everything falls apart. The SA-12MT-PW powered monitor puts you back in control with 300 watts of clean Class D power driving a 12-inch woofer and titanium compression driver. This wedge delivers vocal clarity and instrument detail from 40 Hz to 20 kHz, so whether you're singing lead or monitoring your guitar parts, you'll actually hear what you're playing.

The titanium horn handles vocal frequencies without the harshness you get from cheaper drivers, while the ported cabinet gives you enough low-end to monitor bass parts and kick drums. The onboard 3-band EQ and gain control let you dial in your sound right at the monitor—no running back to the board between songs. At 123 dB max SPL, it cuts through stage volume for club gigs up to 200 people.

Setup is straightforward: XLR in from your monitor send, XLR out to daisy-chain more wedges if needed. The 3.5mm aux input handles backing tracks from your phone or tablet when you're flying solo. Controls are mounted on the side panel where you can actually reach them when the monitor's in position on stage.

The MDF construction with plywood baffle and metal corners handles regular load-ins without falling apart. At 39 pounds, it's manageable for one person but solid enough to stay put when you're moving around on stage. Dual voltage means it works anywhere you're gigging.

Bottom line: This is a solid workhorse monitor that delivers clean, loud monitoring for small to medium venues without breaking the bank or your back.

Pro Tip: Position it behind your mic stand and angle it so the sound hits your ears, not the mic capsule—this prevents feedback and gives you the clearest monitoring.

Technical Specifications

• Power (RMS): 300 Watts
• Power (Peak): 600 Watts
• Amplifier Type: Class D
• Woofer: 12" with 2" voice coil, 40 oz magnet
• HF Driver: 1.35" Titanium compression driver
• Frequency Response: 40 Hz - 20 kHz
• Max SPL: 123 dB
• Sensitivity: 92 dB
• Impedance: 4 Ohms
• Crossover: 2.5 kHz
• THD: ≤0.05%
• Inputs: XLR Female, 3.5mm aux
• Outputs: XLR Male
• Onboard Mixer: 3-band EQ, gain control
• Cabinet: MDF with 5/8" plywood front, ported
• Dimensions: 24.25" H x 18.1" W x 19.25" D
• Weight: 38.6 lbs
• Power Supply: Dual voltage 110-120V / 220-240V
• Warranty: One Year
• Recommended For: Stage monitoring, live sound, studio playback

Frequently Asked Questions

How loud does this get and what size gigs can it handle?

At 123 dB SPL with 300 watts RMS, this monitor handles club gigs, church stages, and outdoor events up to 200 people. You'll have plenty of headroom for clean monitoring even with loud bands. For bigger venues or if you need more coverage, daisy-chain multiple units or add a subwoofer for extended low-end.

What cables do I need to connect this?

Standard XLR cables from your mixer's monitor send to the monitor's input. Use the XLR output to daisy-chain additional monitors if needed. For backing tracks or solo gigs, a standard 3.5mm cable connects your phone or tablet to the aux input. Everything else is built-in.

Can I use this as a main PA speaker instead of just monitoring?

While it can work as a small PA, this wedge is designed for monitoring with its angled dispersion pattern. For main PA duties, you'll want speakers designed to project sound horizontally to the audience. This monitor works best angled up toward performers, not projecting out to a crowd.

How do I prevent feedback when using this on stage?

Position it behind your microphones and away from direct pickup patterns. Use the onboard EQ to cut problem frequencies—usually reducing mids around 800 Hz to 2 kHz helps control feedback. Keep the volume below feedback threshold and consider adding a feedback suppressor or graphic EQ to your signal chain for stubborn frequency buildup.