When you need to hear yourself on stage, these SA-12MT wedge monitors deliver what you expect from a solid pair of 12" floor wedges. The titanium compression drivers cut through stage volume without that harsh bite you get from cheaper horns, while the 12" woofers with 40-ounce magnets give you enough low-end to hear your kick drum or bass guitar fundamentals clearly.

At 200 watts RMS each, they handle most small to medium gigs without breaking a sweat. The dual-ported design gives you more bass response than sealed cabinets, which matters when you're trying to hear yourself over drums and amps. The 96dB sensitivity means they work efficiently with whatever power amp you're already running, and 8-ohm impedance pairs with pretty much any amplifier without impedance matching headaches.

The build quality is what you'd expect for gigging gear—carpeted cabinets that won't show every scuff, recessed handles that won't snag cables during load-in, and metal grilles that can take a mic stand bump. Each monitor weighs 30 pounds, so they're manageable for one person to carry but substantial enough to stay put when you're moving around on stage. The connection options are practical: both 1/4" and Speakon inputs per monitor, so you can use whatever cables you already have.

These work well for club gigs, rehearsal spaces, church services, or any venue seating up to 200 people. They're not going to fill an arena, but they'll give you clear stage monitoring without the budget-breaking price of boutique wedges.

Bottom line: If you need a reliable pair of passive wedge monitors that deliver clear vocals and instruments without breaking the bank, these SA-12MTs will handle most gigging situations where you need to hear yourself on stage.

Technical Specifications

• Power (RMS): 200 Watts
• Power (Peak): 400 Watts
• Woofer: 12" with 40 oz magnet, 2" voice coil
• HF Driver: Titanium compression driver
• Horn: 4" x 10"
• Frequency Response: 45Hz - 20kHz
• Sensitivity: 96dB
• Impedance: 8 Ohms
• Inputs: Two 1/4" jacks, Two Speakon connectors (per monitor)
• Cabinet: Dual-ported design
• Covering: Black carpeted
• Handles: Recessed
• Grille: Full metal
• Dimensions: 23.5" x 14.75" x 14.75"
• Weight: 30 lbs per monitor
• What's in Box: Pair of SA-12MT monitors
• Warranty: One Year
• Recommended For: Band monitoring, venues up to 200 people

Frequently Asked Questions

What size venue can these monitors handle?

These work well for clubs, rehearsal spaces, churches, and venues up to about 200 people. At 200 watts RMS each, they'll give you clear monitoring for most band situations without overpowering smaller rooms. For larger venues or outdoor gigs, you'll want more monitors or higher-powered wedges.

Do I need an amplifier to use these monitors?

Yes, these are passive monitors that require a separate power amplifier. Run cables from your mixer's monitor sends to a power amp, then from the amp to these wedges. If you're used to active monitors with built-in amps, this setup gives you more flexibility to choose your amplification and upgrade power later.

Can I use these as main PA speakers instead of monitors?

They're designed as wedge monitors, but they can work as small PA speakers for intimate venues or coffee shops with audiences under 100 people. The wedge angle makes them ideal for floor monitoring, though you could put them on stands for front-of-house use in very small spaces.

How's the low-end response for bass and kick drum monitoring?

The dual-ported 12" design gives you bass response down to 45Hz, which covers most of what you need to hear for monitoring. You'll hear kick drum fundamentals and bass guitar clearly. If you're monitoring really bass-heavy material or need deeper lows, you might want to add a sub, but for most monitoring these handle the low-end fine.