Pair Dual 12" Speakers~Pair 12" Monitors~4 Cables~PA/DJ

When you need a complete PA system that handles both front-of-house sound and stage monitoring, this Seismic Audio package gives you everything to get your show up and running. The SA-122T mains pack dual 12" woofers with titanium horn tweeters, pushing 1200 watts peak each — enough muscle for clubs up to 300 people or outdoor gigs where you need serious throw. The SA-12MX floor monitors deliver 500 watts peak with focused dispersion that cuts through stage volume without feeding back into your vocal mics.

What sets this system apart is the dual-driver design in the mains. Those two 12" woofers with 40oz magnets give you more low-end punch than single-driver boxes, while the titanium horns keep the highs crisp without being harsh. The monitors use a single 12" with a 50oz magnet and tighter horn pattern — perfect for stage wedges where you need clarity, not volume wars with your drummer.

The connection options cover most scenarios. Dual 1/4" and Speakon inputs on every cabinet mean you can daisy-chain additional speakers when you outgrow the room, or split your signal different ways depending on your mixer setup. The included 50-foot cables handle typical stage-to-FOH distances, though you might want shorter jumpers if your board uses XLR outs.

This isn't audiophile gear, but it's roadworthy and gets the job done. The cabinets are hefty — 60 pounds each for the mains, 43 for the monitors — but that weight comes from substantial drivers and solid construction. The crossovers are basic but functional, and the sensitivity ratings (96dB mains, 101dB monitors) mean they'll work efficiently with most power amps.

Bottom line: If you're a working band, mobile DJ, or house of worship looking for a complete PA solution that covers mains and monitors without breaking the bank, this package delivers reliable performance for mid-sized rooms.

Technical Specifications

• Main Speakers Model: SA-122T (pair)
• Main Speaker Power (RMS): 600 watts each
• Main Speaker Power (Peak): 1200 watts each
• Main Speaker Woofers: Dual 12" with 40oz magnets, 2" Kapton voice coils
• Main Speaker Tweeter: 6x12 Titanium horn driver
• Main Speaker Frequency Response: 45Hz - 20KHz
• Main Speaker Impedance: 4 ohms
• Main Speaker Sensitivity: 96dB
• Main Speaker Crossover: 12/18dB per octave, 2-way
• Main Speaker Inputs: Dual 1/4" and dual Speakon
• Main Speaker Dimensions: 35"H x 16"W x 14"D
• Main Speaker Weight: 60 lbs each
• Monitor Model: SA-12MX (pair)
• Monitor Power (RMS): 250 watts each
• Monitor Power (Peak): 500 watts each
• Monitor Woofer: 12" with 50oz magnet, 2" voice coil
• Monitor Tweeter: 7x9 Titanium horn
• Monitor Frequency Response: 45Hz - 20KHz
• Monitor Impedance: 8 ohms
• Monitor Sensitivity: 101dB
• Monitor Inputs: Dual 1/4" and dual Speakon
• Monitor Dimensions: 25"L x 15"H x 16"D
• Monitor Weight: 43 lbs each
• Cables Included: 4x 50-foot 1/4" TRS cables (Model FS50)
• Cable Gauge: 14 gauge, 2 conductor
• Warranty: One year
• Recommended For: Mid-sized venues, bands, DJs, churches up to 300 people

Frequently Asked Questions

What size venue can this PA system handle?

This system works well for indoor venues up to 300 people or outdoor events up to 200 people. The dual 12" mains provide enough power for clubs, reception halls, small theaters, and mid-sized churches. For larger crowds, you can daisy-chain additional speakers using the dual inputs on each cabinet.

Can I use the floor monitors as additional main speakers?

Yes, the SA-12MX monitors work well as additional PA speakers for smaller rooms or as side fills for outdoor events. They include pole mounts for speaker stands and have the same frequency response as the mains. However, they're lower powered (500 watts peak vs 1200), so they're better suited for monitoring or fill applications.

Do I need additional cables beyond what's included?

The package includes four 50-foot 1/4" TRS cables, which covers most setups where you're connecting a mixer to the main speakers and monitors. You may need shorter cables if your mixer uses XLR outputs, or longer runs for complex stage setups. All speakers accept both 1/4" and Speakon connections.

How do I position the floor monitors to avoid feedback?

Place the monitors in front of the microphones and angle them toward the performers' ears rather than directly at their chest. The SA-12MX monitors have a focused dispersion pattern that helps minimize feedback when positioned correctly. Keep them at least 3 feet from vocal microphones and use your mixer's EQ to notch out any problematic frequencies.