The SA-Rift 46G is for musicians who need real cabinet tone but can't haul around a massive 4x12 or deal with the bulk of a traditional 4x10. This 4x6 cabinet gives you the punch and presence of multiple drivers in a package that actually fits in your sedan and won't throw out your back during load-in.

Four 6-inch drivers with hefty 30-ounce magnets handle both guitar and bass surprisingly well. The 85Hz-5kHz frequency response captures the meat of both instruments — you get the fundamental frequencies that define your tone without the excessive high-end that can get harsh in small rooms. At 250 watts RMS, it pairs nicely with most heads you'll find at rehearsal studios or smaller venues.

What makes this cabinet genuinely useful is its real-world sizing. At 36 pounds and roughly the footprint of a guitar combo, it fits where larger cabinets simply won't. You can actually carry it up narrow venue stairs, fit it in cramped practice rooms, and still get that multi-driver sound that a single 12 can't deliver. The 5/8-inch plywood construction with metal corners handles regular transport without falling apart.

This isn't going to fill a 500-person room or give you the extended low-end of a full-size bass rig. But for practice spaces, coffee shop gigs, small club dates up to 100 people, and studio work where you need authentic cabinet response without excessive volume, it delivers what you need.

**Bottom line:** If you're tired of choosing between portability and proper cabinet tone, this 4x6 gives you both — ideal for gigging musicians who need professional sound in venues where space and volume matter more than maximum output.

Technical Specifications

• Drivers: Four 6" woofers with 30 oz magnets, 1.5" Kapton voice coils
• Power Handling (RMS): 250 watts
• Power Handling (Peak): 500 watts
• Impedance: 8 ohms
• Frequency Response: 85Hz - 5kHz
• Sensitivity: 92dB
• Inputs: Dual 1/4" terminal cup
• Cabinet Construction: 5/8" plywood front panel, tolex with metal corners
• Grille: Full metal grille
• Handle: Recessed handle
• Dimensions (H x W x D): 17.5" x 16" x 18"
• Weight: 36 lbs
• Warranty: One year
• Recommended For: Guitar/bass practice, small venues, recording studios

Frequently Asked Questions

Will this actually work for bass, or is it just marketed that way?

It genuinely works for bass, especially if you're not trying to shake the foundation. The four 6-inch drivers with 30-ounce magnets move enough air to handle bass fundamentals down to 85Hz, which covers most of what you need for small venue work. You'll lose some of the deep sub-bass compared to 15s or 18s, but you get focused low-mids that cut through a mix. For practice and smaller gigs, it's legit.

How loud can this thing actually get?

With 250 watts RMS and 92dB sensitivity, you're looking at comfortable volume for rooms up to 100 people. It's not going to compete with a full stack, but it'll keep up with a reasonably loud drummer in most small club situations. Push it too hard and it'll compress rather than break up harshly, which is actually useful for bass applications.

Can I daisy-chain another cabinet to this?

Yes, the dual 1/4" inputs let you chain to additional cabinets. Just remember that adding another 8-ohm cabinet drops your total impedance to 4 ohms, so make sure your head can handle that load. Two of these cabinets would give you 500 watts of handling and significantly more stage presence.

How does this compare to a single 12 or 15?

You get more surface area and driver interaction than a single speaker, which means better dispersion and that multi-driver punch. A single 15 might go deeper, and a 12 might have more focused mids, but this 4x6 configuration gives you a broader sweet spot and more even coverage across the stage. Plus, if one driver takes a hit, you've still got three others working.