When you're on stage and can't hear yourself in the mix, everything falls apart. The FL-10MP-PW powered floor monitor puts your vocals and instruments right back where you need them — at your feet, cutting through the stage wash without feeding back.

This 10-inch powered wedge delivers 250 watts RMS through a titanium horn tweeter that keeps vocals crisp even when the drummer's getting excited. The 60-ounce magnet woofer has enough punch to let you feel your bass lines and kick drum without muddying up the mix. At 96 dB sensitivity, it doesn't need to work hard to get loud, which means cleaner sound when you're pushing it at smaller venues.

The dual pole mount setup gives you options — use it as a traditional floor wedge or flip it sideways on a stand for small PA duty. The XLR loop-through means you can daisy-chain multiple units from one monitor send, so your whole band can get their own mix without eating up mixer outputs. When you need to run backing tracks between sets, the 3.5mm input lets you plug your phone straight in.

Built from 7-ply birch with metal corners, this thing will survive regular load-ins. At 36 pounds, it's manageable for one person but substantial enough that it won't slide around on stage when you're moving. The front-panel EQ lets you dial out room resonances or add presence without running back to the board.

Bottom line: If you need reliable stage monitoring that doesn't require a separate amp rack and sounds good enough for small venue PA work, this 10-inch powered wedge handles both jobs without breaking your back or your budget.

Pro Tip: Position the monitor so it's firing across the stage parallel to the front edge rather than straight back at you — you'll get better coverage and less chance of feedback from your vocal mic.

Technical Specifications

• Power (RMS): 250 Watts
• Power (Peak): 500 Watts
• Amplifier Type: Class D
• Woofer: 10" with 60 oz magnet, 2" voice coil
• HF Driver: Titanium Horn
• Frequency Response: 65 Hz - 20 kHz
• Max SPL: 105 dB
• Sensitivity: 96 dB
• Impedance: 8 Ohms
• Inputs: XLR Female, 3.5mm
• Outputs: XLR Male
• Onboard Controls: 3-band EQ, Gain Control
• Cabinet: 7-ply birch plywood with metal corners
• Covering: Black carpet
• Dimensions: 21.75" H x 13" W x 14.75" D
• Weight: 36.3 lbs
• Pole Mount: Yes (bottom and side)
• Warranty: One Year
• Recommended For: Stage monitoring, small-medium venues

Frequently Asked Questions

How loud does this get and will it work for my band's venues?

At 105 dB max SPL, this monitor handles small to medium venues up to about 200 people. It'll cut through most stage mixes without feeding back when positioned correctly. For larger venues or if you're competing with a loud drummer, you'll want to step up to a 12-inch model or add more monitors.

Can I use this as a main PA speaker instead of just monitoring?

Yes — the side pole mount lets you throw it on a speaker stand for small acoustic gigs or speaking events. But remember, it's a single 10-inch speaker optimized for monitoring, not full-range PA work. It'll handle coffee shop sets and small acoustic performances, but don't expect it to fill a room like dedicated mains.

What happens if I daisy-chain multiple monitors?

The XLR loop-through passes signal to the next monitor in the chain, so you can run several units from one mixer send. Each monitor has its own gain and EQ controls, so band members can dial in their own sound. Just remember that you're splitting the signal, so you might need to boost the send level from your mixer.

Do I need anything else to get this running?

Just XLR cables and power. Connect from your mixer's monitor send to the XLR input, plug it into the wall, and you're ready. If you want to run backing tracks, grab a 3.5mm cable to connect your phone or tablet to the aux input.