JBL 2213 JBL 4311 JBL4312 D123 SINGLE RE-CONE REAL AGGREGATE L100 USA MADE

*READ BEFORE PURCHASE!*

((((((**** PICTURES SHOWS 2 RE-CONE KITS (available in a separate posting), BUT THIS POSTING IS FOR ONE KIT/  ,  A SINGLE KIT THAT CAN REBUILD ONE SPEAKER******))))The pictures are merely copied over to provide you guys with a single kit option...

*******YOUR CHOICE OF FOAM HALF ROLL OR CLOTH SURROUND

BE SURE you understand this...,.  if you don't..........well..... you know....

Up for grabs is this SINGLE  (ONE kit ) re-cone kit for the 12" white cone JBL woofer/speakers....These even have the gray dampener/stiffener applied to the rear of the cones..

 Every now and then, there are dingy tan or yellow 2213 cones posted, that have a nice lead-in sales pitch, only to tell you later in the description  that "they adhere as closely as possible" to the white coating  .... . That's still not "factory", and they cost 5 times as much.Not to mention tolerances that are too wide to mention.With these, you get what you see- WHITE cones.

****  These are NOT the recycled fortune cookie, chop sticks, and newspaper pulp junk from over seas.

((((((((....Their (import) cones offered are a STRAIGHT or conical sided profile, are not the correct shape, do not have the ribs, do not posses the manufactured aggregates, are too light in weight (( detunes enclosure/loss of your bass response)and are NOT the curve-linear shaped profile as your JBL 2213 speakers actually are...))))))))

 They might FIT , but they do not have the proper aggregate like  PMR uses, , and definitely will not sound correct.. These offered here by PMR are the correct cones.  Read the bottom of my listing to see the cone details

** WE NAILED THOSE DETAILS and START WITH A REAL  OEM JBL CONE, and then apply our coatings and REAL AGGREGATES  with  dampeners to yield the product you see.

******ALL AMERICAN MADE COMPONENTS/ NO IMPORT JUNK***

 To be specific,

This single kit that you get contains:

*Litz wire for 1 speaker

*Re-pressed paper/deep profile dust cap-  ONE piece

*Ultra high compliance lightweight .010" thick sealed textile accordion surround.  ONE piece

*P.M.Reproductions engineered  "AQUAPLAX" textured/dampened  white coated cone. ONE cone. JBL cone, NOT IMPORT!

*ONE  voice coil 8 ohms

*ONE high compliance spider assembly

*ONE cloth surround

 BIG DIFFERENCE in tonality..  buy an import, and you'll see why/ be glad  I offer these..

 **. These are NOT the 'house paint' cone imports as offered by others**** REAL JBL CONE PULP

*YOU MUST RE-USE YOUR FRONT MOUNTING GASKETS- THEY ARE NOT INCLUDED IN THIS KIT(and they are easily re-usable to save a few bucks too)))...

  Now, below is the description from my listing for just the cones, so you'll have a better idea of what you are buying, and the quality they posses....

..(((((   I HAVE MANY OTHER AQUAPLAXX CONE STYLES AND SIZES AS WELL-  JUST ASK!!!)))))))

  .....  If you have ever tried to find the textured  "AQUAPLAX" WHITE cone assemblies for the JBL woofers, you'll find that those are IMPOSSIBLE to find, and you have to settle for either cheap Waldooom, after market, black bay junk, replacement , or Chinport garbage , which are only dyed white, the INCORRECT cone style, incorrect cone SHAPE , are too light which ruins enclosure tuning (loss of bass response) don't have the ribs,  and do not have the coating which is what makes these speakers what they are.

  ** WE NAILED THOSE DETAILS and START WITH A REAL  OEM JBL CONE, and then apply our coatings and REAL AGGREGATES  with  dampeners to yield the product you see.

 Replacement parts sound replacement- JBL parts sound JBL!!!.....

  Impossible to find.......

. *** UNTIL NOW!!!*****

.  These cone assemblies are REAL JBL cones,  and are made with REAL JBL pulp!

.....Real JBL parts = real JBL sound!!!

,.....First, these are the cones for the 12" woofers, with a 3" diameter voice coil..These work for the L100, and MANY of the same style model JBL woofers, so they'll fit quite a few models...

   Secondly, I will provide you with YOUR CHOICE of either an accordion profile/textile cloth surround, or either a poly foam-rubber half roll surround.....  And- don't forget I mentioned I'll toss in a dust cap as well.......

....  The dimensions are:

 *Made for a -    -                                                                12" O.D. woofer

*I.D.-    -                                                                              3.010"

*Cone material-       -                                                           Pulp
*Weight > =                                                                           60grams

*Cone profile-     -                                                                 Curve-Linear/ Fully ribbed body!

*Surface-      -                                        White "AQUAPLAX" textured dampener/stiffener coating

*Depth- ~-     -                                                                       Approximately 1.675"  or 1 5/8"

*Coolness factor since they're white "AQUAPLAX"- --            100%!!!

  ************************************DUE TO THE NATURE OF LOUDSPEAKER REPAIRS AND THE FACT ALL DIMENSIONS AND MATERIALS DESCRIPTIONS HAVE BEEN PROVIDED IT IS ULTIMATELY UP TO THE CUSTOMER TO DETERMINE COMPATIBILITY. THERE-FORE ALL RE-CONE KITS ARE SOLD AND AGREED UPON  "AS-IS-ELECTRICAL", WITHOUT EXCHANGE., REFUND, RETURN, OR WARRANTY *********************************************

BUT-

....But, if you should happen to have questions along the process- JUST ASK< and I will do my best to help you out!!

....   So, if you've been looking for the WHITE AQUAPLAX style woofer parts, then here ya' go!!!

 ANY questions or concerns- just ask..

 --THANKS GUYS!!!-