QSC CXD4.3Q Power Amplifier New in Unopened Box

QSC CXD4.3Q New Unopen Box.  
Features

• Seamless Q-SYS integration with audio transport and control via standard Gigabit Ethernet protocols and hardware
• Capable of providing up to 5,000 watts continuous and 8,000 watts peak with 70V or 100V direct drive available on each output of the CXD4.3Q and CXD4.5Q, and on bridged output pairs of the CXD4.2Q
• Flexible Amplifier Summing Technology™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels
• PowerLight universal switch mode power supply with PFC for highest efficiency, improved audio performance, and low weight
• Mic/Line input Euroblock connectors and touch-proof Euroblock loudspeaker connections
• Eight bi-directional GPIO connections that can be used for analog or digital inputs or outputs to/from Q-SYS
• Built-in energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality
• Q-SYS technical support is available 24/7 - worldwide

General Specifications  Typical distortion 0.01 – 0.06%Maximum distortion1.00%Frequency response20 Hz–15 kHz ±0.2 dB
20 Hz–20 kHz +0.2/-0.7 dBNoise
Unweighted
Weighted
-101 dB
-109 dBGain (1.2V setting)34.0 dB38.4 dB38.4 dBDamping factor>150Input impedance>10k ohm, balanced or unbalancedMaximum rms input level
(3.9V setting)
(1.2V setting)

12.28 V (+24 dBu)
3.88 V (+14 dBu)Amplifier and load protectionShort circuit, open circuit, thermal, RF protection. on/off muting, DC fault shutdown, active inrush limiting, input current limitingAC power input4.2: Universal Power Supply 100-132/200–240 VAC, 50–60 Hz4.3/4.5: Universal Power Supply 100–240 VAC, 50–60 HzAgency approvalsUL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions)Carton contentsLocking IEC cable, Quick Start Guide, USB cable Power Specifications   MaxContinuousMaxContinuousMaxContinuous4 Independent Channels
A, B, C, D
 70VN/AN/A500 W500 W1000 W1000 W100VN/AN/A625 W625 W1250 W1250 W8Ω500 W400 W900 W625 W1200 W1150 W 4Ω700 W400 W1400 W625 W2000 W1250 W 2Ω625 W325 W1200 W625 W1600 W625 W2 Channel BTL Bridged
A+B or C+D
Doubles Voltage
 70V-4.2Q1500 W800 WN/AN/AN/AN/A100V-4.2Q1200 W800 WN/AN/AN/AN/A8Ω1200 W800 W2400 W1250 W4000 W2250 W4Ω1500 W600 WNR*NR*NR*NR*2ΩNR*NR*NR*NR*NR*NR*2 Channel Parallel
AB or CD
Doubles Current
 70VN/AN/A1800 W1150 W2000 W1800 W100VN/AN/A1150 W1150 W1150 W1150 W8Ω500 W400 W1300 W1150 W1250 W1150 W4Ω950 W800 W2000 W1250 W2400 W2250 W2Ω1200 W800 W2500 W1250 W4000 W2100 W1 Channel 3CH Parallel
ABC
Triples Current
 8Ω500 W400 W1400 W1150 W1400 W1150 W4Ω950 W800 W2400 W2000 W2500 W2400 W2Ω1800 W1200 W3500 W2500 W4500 W4100 W1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
 8Ω1600 W1500 W3500 W2500 W4500 W4200 W4Ω2500 W1600 W5000 W2500 W7500 W4200 W2ΩNR*NR*NR*NR*NR*NR*1 Channel 4CH Parallel
ABCD
Quadruples Current
 8Ω500 W400 W1400 W1150 W1600 W1150 W4Ω1000 W800 W3000 W2500 W3000 W2300 W2Ω1700 W1600 W5000 W2500 W5300 W4200 W

NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration fo the load and channel count

Controls, Indicators and Connections  Controls and indicators (front)Power• Channel MUTE Buttons • Channel SELECT buttons • Channel input signal and CLIP LED indicators • Channel output and LIMIT LED meters • HOME, ENTER, EXIT, GAIN navigation buttons • Control knobControls and indicators (rear)AC power disconnect

Rear panel connectorsInput: Four 3-pin EuroblockOutput: Four 2-pin Euroblock SpeakerLink/IO/Network: USB Type B; eight GPIO; NC & NO relay; two RJ45 (LAN A & LAN B) Weights and Dimensions  Dimensions (HWD) inches3.5 × 19 × 123.5 × 19 × 163.5 × 19 × 16Dimensions (HWD) mm89 x 482 × 30589 × 482 × 40689 × 482 × 406Weight Net18.5 lb / 8.39 kg21 lb / 9.53 kg22 lb / 9.98 kgWeight Shipping22 lb / 10.0 kg25 lb / 11.3 kg26 lb / 11.8 kg