Alpine SWT-10S4 10" 1000W Peak/350W RMS Shallow Slim Truck Car Subwoofer Bundle with AudioControl The Epicenter Black Digital Car Bass Processor with Remote Audio Control
This seller has not set a shipping cost for Hungary. Please contact them to ask about shipping.
Price€329.52
+ Shipping
Listed:over a month ago
Views:6
Saves:0
Offers:0
Los Angeles, CA, United States
14-Day Return Policy
Enjoy peace of mind with your new gear
Our users rate Reverb
2) Alpine SWT-10S4 10\" 1000W Shallow Slim Subwoofers+AudioControl Bass Processor
2 Alpine SWT-10S4 1000W Peak 10\" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound here\'s a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10\" subwoofer to go behind your seat, and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that\'ll fit behind or under the seat in your truck. A \"high amplitude\" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub\'s pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16\" without blocking critical airflow. An SWT-10S4 will work well in either a ported or a sealed box, so you can get your favorite kind of bass tone, boomy or tight. The power takes for top performance, you\'ll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, 4-ohm sub will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you\'re planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features:- 10\" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
- Power Handling:
- Peak: 1,000 watts
- RMS: 350 watts
- Recommended Power Range: 100W - 350W
- Poly-Mica Dust Cap & Pulp-Kevlar
- Polyurethane Foam Surround
- H.A.M.R. Surround Technology
- Spiral Cut Aluminum Former
- 65mm Voice Coil with High-Temp 4-Layer SVC Winding
- 8AWG Push Terminals
- Top-mount depth: 4-3/16\"
- Mounting Diameter: 8-15/16\'\'
- Frequency Response: 30 - 200 Hz
- Sensitivity: 84.8 dB
- Authorized Dealer
- 1-year Manufacturer\'s Warranty
What\'s in the box:
- 10\" Thin-mount subwoofer
- Rubber trim-ring (installed)
- Application Guide
- Online product registration information (English/ French/ Spanish)
- Warranty information (English/ French)
- Important Notice! (English/ French)
- Alpine SWT-10S4 owner\'s manual
Audio Control The Epicenter Concert Series
Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.
Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
General Features:
- Brand new Epicenter inbox
- Digital Bass Reconstruction Processor
- Patented Bass Maximizer™
- Dash-mount control
- Bass restoration lighted display
- Parametric bass control
- PFM Subsonic Filter
- Balanced inputs
- Bass Output Control
- Color: Black Blue
- Also Available in Sierra White
- Weight: 1.70lbs
- Dimensions: 8\"W x 5.50\"D x 1.20\"H
- Authorized Internet Dealer
- 5 Year Manufacturer\'s Warranty (*when installed by an authorized AudioControl dealer)
The Epicenter Specifications
- Maximum pre-amp input level: 9.5 Vrms
- Maximum speaker-level input: 400 watts @ 4ohm
- Maximum output level: 9.5 Vrms
- Frequency response: 10 - 22,000 Hz; ±1dB
- Total harmonic distortion: 0.003%
- Signal to Noise ratio: -130dB
- Balanced input noise rejection: >60dB
- Input Impedance: 20 Kohms
- Output Impedance: 150 Ohms
- Power supply: High headroom PWM
- Power draw: 285mA
- Recommended fuse rating: 2 Amps
- Maximum remote trigger output current: 1 Amp
- Country of origin: U.S.A.
What is in the box:
- Pre-amp Bass Restoration Processor (black)
- Remote dash mount control
- 20\' RJ-14 cable
- Instructions/Specs/Warranty (on packaging)
- Quality Control Certificate
- AudioControl The Epicenter owner\'s manual
⚠️Warning:
Cancer and Reproductive Harm-
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
Product safety information may be available here.
