ART X-15 Ultrafoot Firmware upgrade EPROM v1.7

* Upgrade your Ultrafoot X-15 MIDI Expression pedal with this latest firmware version
* With original X-15 Ultrafoot MIDI controller you can only send MIDI program changes from program 1 to128 but not beyond

* This new firmware version will allow you to switch all the way up to program No. 255

Please note, this listing is for upgrade CHIP only—no X-15 footswitch is included. Returns are not accepted unless the item arrives damaged or significantly different from the description.

* Required for ART SGX 2000 Express
* To see your current FW version perform the following set of steps: Directly after power-up and before the display shows Art, press simultaneously the BYPASS, 9 and 10 pads. You are now in pedal test mode. While you are in this mode, press any activator pad except the MODE pad and the software version will be displayed.
* Comes with detailed instructions
* 100% functionality secured by rigorous manufacturing and testing process, compliant with ESD safe environment.
* 14 days money back guarantee if you're not satisfied
* Check my 100% buyer satisfaction here on Reverb

From the manual: New version 1.07 software incorporates the MMA/JMSC Bank select protocol to access beyond 128 locations. Three modes of preset recall are available: 1-128, 1-200 and 1-255. Bank up and down pads are provided for quick access to any preset location. LED’s located above each numbered pad indicate the preset selected within a bank. In Effects Mode the numbered pads to function as MIDI on/off controllers. When used with A R T processors, individual effects can be turned on and off in a preset. These controllers are fully programmable for use with other equipment.

Link to ART SGX2000 Express v1.10 firmware upgrade chip now in my Reverb shop: https://reverb.com/item/40937479-art-sgx2000-sgx-2000-express-version-1-10-firmware-os-upgrade-eprom-same-day-shipping