Ideka Electronics Ram The Manparts clone (with clipping mod)
This is a LM386 power amp overdrive based on the retired Ram The Manparts by Fuzzrocious (They make really rad pedals, please go buy them) . This pedal is very simple yet versatile in its design. You can use it as a good crunch box, an all-out face melting amp pusher or round things out with some glitchy low octave 8-bit goodness with a tweak of the starve knob. The original comes with a low/high gain switch. I decided to go with all high gain and replace it with a hard clipping stage with a switch to change between Germanium (1N34A), stock no clipping and Red LED. This pedal has true bypass switching, blue LED indicator light, quality Lumberg Jacks and 9V power input.
Volume (Left) - Adjusts output volume.
Starve (right) – At 10 this knob gives you 9v and the pedal is a straightforward dirt box. As you sweep counterclockwise it starve the voltage to the circuit which in turn can thicken your sound and at a certain point (around 6 o clock) things get glitchy. Beyond the glitch zone it will begin to no longer pass signal and the circuit will not pass audio. Turn it back up and your circuit gets its necessary voltage back and the pedal allows for shreddage again. The clipping does affect the starve response. The LED and Germanium drop signal usually at about 3 o’ clock but start getting into low octave fuzz territory thereafter in the sweep.
Clipping toggle switch – (Left/Center/Right) ///// 1N4A(Germanium)/No clipping/Red LED
| Condizione | Nuovo (Nuovo) Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più |
|---|---|
| Marchio |
|
| Modello |
|
| Categorie | |
| Anno |
|
| Prodotto in |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.

