Looking for a compact volume controller that doesn't crowd your pedalboard? The Saturnworks volume pedal provides volume control in a compact affordable package - perfect for trimming the overall level at the end your board or keeping things quiet so you don't get evicted. 

The Saturnworks volume pedal is loaded with boutique-quality components and features including:

• A cast-aluminum 3.6" x 1.5" (1590A size) enclosure. 
• Heavy duty 1/4" TS Neutrik jacks. 
• Passive construction does not require power to work.
• High quality wire made in the USA. 
• Handcrafted and bench-tested in California.
• A 1-year limited warranty against parts and manufacturing defects. See saturnworkspedals.com for warranty terms and conditions.
  

The Saturnworks passive volume pedal comes standard with a 250k audio taper pot. This is the most common pot value in passive volume pedals, such as the well known Ernie Ball volume pedal. 250k pots work well with standard (non-buffered) guitar signals.

If you have a lower-impedance signal, such as a buffered or line-level signal, other pot values, such as 100k or 25k, or 10k, may be installed upon request. We recommend a 100k or 25k pot for buffered instrument level signals or a 10k pot for line level. 100k is typically a good values for use in amp effects loops as they’re typically buffered.

If would would like a pot other than the standard 250k, just send a message after you check out specifying the pot you would like. 

If you don’t have a buffer in your setup and are looking for a volume controller that also preserves your tone over long cable runs, check out our listing for the Saturnworks active volume pedal -- a combination buffer/volume pedal. 

Check out saturnworkspedals.com for the full Saturnworks lineup.