StewMac 120V Guitar Buffing & Polishing System Designed for Instrument Finishing - Complete System

The only buffing system designed for instrument finishing, this is a factory buffer scaled for a small shop!

"Other buffers don't give you enough room to move the instrument, and they run too fast—burning off the finish you're trying to polish. StewMac's guitar builders and tool designers talked about what we wanted in a buffer, and what we want to avoid. No other company has designed a buffing arbor system so specifically for luthiers' needs." — Jay Hostetler, VP Product Development, StewMac

Features that match the industrial buffers at major guitar factories:

• Our exclusive professional buffing outfit features a slow 715-rpm buff speed, ideal for delicate instrument finishes.
• More room to polish large guitars: 36"-long arbor shaft and a small housing for increased clearance.
• Larger buffing surface: big 14" buffs, selected especially for instrument finishing.
• The right speed: slow 715-rpm buff speed is ideal for delicate instrument finishes. Driven by a powerful 3/4-horse motor.
• Smooth running and quiet. Pillow block bearings on a half-inch-thick aluminum baseplate anchor the shaft for minimal vibration.
• 3/4-horse motor. Power for the large surface contact required to buff guitars.

Includes:

• Buffing arbor with V-belt
• Motor (3/4 horsepower, 1725-rpm, 60 Hz with 1.89" pulley)
• 4 Buffing wheels (2 Canton and 2 Domet)
• Mounting flanges
• Buffing wheel rake
• Colortone Buffing Compounds (one each of medium, fine and extra-fine)
• Instructions

Arbor specs:

• Arbor shaft diameter: 1"
• Overall length of shaft: 36"
• Maximum buffing wheel: 14"