StewMac Brown Binding Tape, Set of 3

Our favorite brown tape is back!
For years we carried "brown tape" and it became a beloved favorite by builders and repair people alike, but after many years the manufacturer ceased its production. Since then, we've been searching the globe trying to find a reliable source for this fantastic tape.

Our "new" brown tape has the same tack, durability, and strength you remember. It's ultra-high tack and ultra tough. You can pull very hard on this tape without breaking, making it perfect for installing wood bindings and other clamping jobs.

It's great for fret work too.
For many, our brown tape was also a favorite for fretwork. One application was tough enough to withstand the filing, buffing and polishing involved in most fret jobs and fret level/dress work.

New tape sizes for every job.
Our old brown tape only came in one size—now we're thrilled to offer three sizes for any job you have. We have 3/4", 1/2", and 1/4" widths that will let you find the right size for the job.

This is a great tape for protecting a finish during neck or bridge for removal (if you are working on a delicate finish, we recommend using a low-tack tape first), masking a fretboard for fret work, and of course installing binding.

Get the tape that works better than you remember!

Pro Tip! When binding a guitar, when the glue is dry, remove the tape slowly and gently—pull at a 45 degree angle to the grain and lightly rub it with your index finger. Warming the tape with a blow dryer or softening the adhesive with naptha will also help it lift away easily without pulling up wood fibers.

This set of 3 is supplied in the following sizes:

• 3/4" wide, 60 yard roll (19mm x 55m)
• 1/2" wide, 60 yard roll (12.7mm x 55m)
• 1/4" wide, 60 yard roll (6.53mm x 55m)