Replacement pickguard for Squier Bullet or Sonic Mustang convert to single coils

Do you have a Squier Bullet Mustang and want something a little nicer and different than the stock plain white pickguard? Here it is!

 This is a conversion pickguard that allows you to put two Stratocaster sized single coils in place of the stock humbuckers for more of a traditional Mustang or Duo-Sonic look and sound.

NOTE: THIS PICKGUARD WILL NOT FIT THE RECENT CHINA MADE BULLET WITH 11 PICKGUARD SCREWS. WE HAVE A TEMPLATE FOR THAT VERSION. ASK!

Shown is 3 ply black, white pearloid, red pearloid, single ply white, 3 ply Parchment, black pearloid, 3 ply mint green, Pink 4 ply, 4 ply white, and a few of the color choices. Have a look and ask if the color you'd like is available. Some of the available colors and materials are more expensive.
See the list below for an idea of what is available.

 For an additional $10. we can cut this with a deluxe vintage style wide 60 degree beveled edge like the 60s and 70s vintage Mustangs had.

Here's a list of most of our stock materials and colors:

We have a "budget" Brown tortoise 3 ply, which has a printed pattern.

Next are the black, white, and off-white colors. Our custom laminated 4 ply material is not available anywhere else.

M1. White single ply .090" usually cut with straight, seamed edge
  M1a. White single ply thin .060" cut with straight, seamed edge
M2. White 3 ply, white/black/white
M3. 4 Ply White, W/B/W/B - custom color! Similar to material used on vintage Japanese guitars. A great choice for Gibson electics!
M4. Parchment single ply .090" usually cut with straight, seamed edge
M5. Parchment (off-white) 3 ply
M6. Cream single ply .090" usually cut with straight, seamed edge
M7. Cream 3 Ply, cream/black/cream
M8. Ivory 3 ply, a slightly mint-green off-white
M9. Light Mint Green 3 ply, our standard mint green
M10. Dark Mint Green 3 ply
M11. Black 1 ply, .090" solid black, usually cut with straight, seamed edge
M11a. Black 1 ply, .060" solid black, cut with straight, seamed edge
M12. Matte Black 1 ply, .090" solid black, usually cut with straight, seamed edge
M13. Black 3 ply, black/white/black
M14. Black/Parchment/Black 3 ply Similar to an older material with a slightly aged center laminate
M15. "Aged" Black 3 ply, black/cream/black Similar to an older black guard where the white layer has yellowed
M16. 4 ply Black, B/W/B/W - custom color! Similar to material used on Japanese electrics of the 1960s and 70s.
M17. 5 Ply Black, the go-to for most Gibson electric pickguards
M18. 5 Ply Black/Cream/Black/Cream/Black Looks like a 5 ply black where the white layers have yellowed

These are "plain" colors laminated on 3 ply white backing, unless otherwise specified

L1. Red 4 ply, a slightly more Fiesta Red color
L2. Red 3 ply with black center, Red/Black/Red
L3. Red 3 ply with white center, Red/White/Red
L4. Orange 4 ply
L5. Yellow 4 ply
L6. Green 4 ply
L7. Blue 4 ply
L8. Lilac Purple 4 ply
L9. Hot Pink 4 ply

Next are the various pearloid colors.

P2. WD White pearloid
P3. Aged Pearloid, on white/black/white backing
  P3a. Parchment pearloid, Allparts material, an aged, yellowed pearloid on 3 ply parchment backing. Higher cost.
P4. Cream Pearloid, on cream/black/cream backing
P5. Mint Green Pearloid, on mint green/black/mint green backing
P6. Black Pearloid, on black/white/black backing
P7. Gray Pearloid, on black/white/black backing
P8. Red Pearloid, on white/black/white backing
P9. Ruby Red Pearloid, on black/cream/black backing - custom

P12. Purple Pearloid, on white/black/white backing
P13. Lavender Pearloid, on black/cream/black backing - custom color!
P14. Marine Blue Pearloid, on white/black/white backing
P15. Teal Blue Pearloid, on black/cream/black backing - custom color!
P16. Aqua Blue Pearloid, on white/black/white backing
P17. Green Pearloid, on 3 ply white backing

A1. Clear plexi
A2. Frosted plexi
A3. Acrylic Mirror
A4. Dark Red transparent plexi, very dark
A5. Smoke/Bronxe transparent plexi, very dark
A6. White plexi, as used on Rickenbackers
A7. Red plexi, primary red
A8. Faux anodized gold, a thinner flexible material that simulates the look of anodized aluminum.

Various cast materials with natural veriegation. Some of these are fairly transparent and will show screws, cavities, routs, controls, and wiring.
If transparency is not desired, they can be back-painted.

V1. Dark Red tortoise, solid celluloid. 2mm thick. This material will slightly show what is underneath and looks fairly dark if not backed by a light color.
V2. Cast acrylic tortoise. This is a swirled pattern of darker color in a reddish translucent base. This is a 3mm thick material used for archtop pickguards.
V3. Dalmation tortoise, solid celluloid about .1" thick. Only available in smaller sizes, can be laminated to double thickness.
V4. Acrylic Dalmation tortoise laminate. A thin layer of dalmation brown and yellow material between two transparent acrylic sheets.

Various materials with imprinted graphics. we can order a huge variety of graphic printed materials not normally seen on guitars. Go wild!

G1. Snakeskin, available in many colors. This material is .080" thick with a hair cell texture.
    a. Blood Red
    b. Sea Green
G2. Fire/Flame graphic. .080" thick on fluorescent yellow backing with hair cell texture
  G2a. Purple Flame graphic
  G2b. Blue Flame graphic
G3. "Skullpile", bone white demon skulls on black, .093" thick with pebble texture
G4. "H2O", fossilized fish graphic, .080" with hair cell texture
G5. Black and Silver Paisley, Laminated material from WD, gloss surface
G6. Printed Dalmation tortoise. black pattern printed on an orange background, on 3 ply white backing.