The Seymour Duncan Studio Bass Compressor pedal was designed for professional bassists looking for a compressor that can provide increased sustain, accentuated picking and can even out single-note runs. It's extremely low noise and has an easy-to-use control format.

Product Features

• Compression Ratio: Soft-knee, adjustable from 1:1 to > 20:1
• Maximum Compressor Gain: +33dB
• Attack Speed: Adjustable from 8ms to 27ms
• Input Impedance: 1 Megohm
• Output Impedance: 2.75K ohms maximum
• Maximum Input Level: 3 Vrms
• Distortion: < 0.3% at 300mV RMS output at 1 kHz
• Noise referred to Input: -110dBV, 400 Hz - 20 kHz, input shorted
• Compressor Type: Voltage Controlled Amplifier (VCA)
• Current Consumption: 21mA operate, 19mA bypass

Attributes

• Color (X): Black
• Effect Type (X): Compressor/EQ

Included Items

This versatile studio-grade compressor is a must have for any bass player looking to maximize their sound, with a range of tones from subtle to super-squashed. One of the secrets to the Studio Bass’s power is its 3-position mini-toggle and blend knob, which give you near limitless control over your tone by letting you mix uncompressed tones alongside the affected sound. Blend in your unadulterated clean signal, a mid boost that will help you cut through the busiest mixes, or a fat low-end growl. Find that sweet spot where harder picking lifts the dry signal right up above the effected signal or mix in just a hint of the original sound. Punk rock pick players, slap-happy funkateers and ferocious fingerstyle players alike will find endless sonic options, and there’s enough power that you can even use it as a clean boost for solos. It also makes a great ‘always-on’ pedal to form the heart of your sound.

Attributes

• Color: Black

Technical Specifications

• Features: Battery-Powered
• Dimensions: 1.45" H x 2.6" W x 5" D
• Weight: .67 lbs
• Inputs: 1 x 1/4"
• Outputs: 1 x 1/4"
• Power Source: 9V DC power supply (not included)
• Effects: Compressor
• Processing Type: Analog
• Batteries: 1 x 9V
• Power Usage: 21mA

Stukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.

Attributes

• Color: Black

Technical Specifications

• Type: Patch
• Unit Count: Single
• From Connector: 1/4"
• To Connector: 1/4"
• Connector Angle: Right Angle to Right Angle
• Balanced: No
• Cable Length: 6"