Marshall Haze 40 Standard JJ Retube(TM) Kit with Big Bottle 6CA7's

Looking for that super "wooly" Doom or Stoner type tone? This is our standard Retube Kit for the Marshall Haze 40 amps with the Big Bottle JJ 6CA7's. It contains a premium matched pair of the JJ Electronic 6CA7's for power along with three JJ ECC83S's with one being current balanced for the phase inverter in V3. The JJ 6CA7's have a huge low end and an emphasis on the low mids so if you tune way down and tend to back your highs off these tubes will handle it with ease.

Using a well-balanced preamp tube in the phase inverter position will eliminate any phase cancellation allowing all notes to ring out and sustain well.

Unlike other tube venders who charge for low noise tubes, all our tubes meet rigorous tests for low noise, microphonics and nine additional tests.

If you use an extension cab with your amp and want all the power and fidelity to get from your amp to your speakers then check out our custom made 10 Gauge speaker cables in our Reverb storefront. These cables are the largest cables made and leave no frequency unheard!

If you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper Tube Damper Rings for the power tubes. Combo amps are excessively hard on tubes because of all the vibrations. Even though we test for noise, no tube is immune to developing a rattle in this harsh environment. These are available here on Reverb in the Eurotubes storefront as a set of 2 and will greatly decrease tube rattle.

The video below shows both our preamp tube testing and power tube matching procedures here at Eurotubes which are second to none. We may not be the cheapest, but we are arguably the best.

Shipped and insured by Priority mail which is a 2 to 3 day delivery!