Legendary Tones Hot Mod V2 EVO 2019-2022 Hot Rodded Marshall Gain Stage

This is the V2 EVO version with bass boost and gain selection. The unit is in proper working condition with no issues- worked as it should in a 6V6 JTM45 that I built. I barely used it since purchasing in 2022. Comes with the 2-JJ 12ax7’s that were in it when I purchased it. Serial #1379

From Legendary Tones:

Introducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual tube module specifically engineered to dramatically increase gain in Marshall and other amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the appropriate cathode follower (often V2) position. The circuit within harnesses the power of an additional gain stage now running an additional tube.

Want your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.

With the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!