Eric Merrow Eric Merrow Combo Amp Extension Box V2

Eric Merrow Combo Amp Extension Box V2 in excellent condition. Easily add a speaker output jack to your combo amp (Boss Katana, Fender Mustang, etc).

Description

Have you ever wanted to run your combo amp through an external 2x12 or even a massive 4x12? Maybe you want to use the combo amp internal speaker for a different amplifier? The Combo Amp Extension Box v2 lets you exactly that! This box adds both a speaker output and external amp input to any combo amp that does not have one. The box installs between the amp and the speaker so there's no modifying your amp and the box installs easily. No soldering required!

What does the Combo Amp Extension

Box do?The box is installed in a combo amplifier that does not have a speaker output jack. It gives you the ability to route your combo amp's signal to an external speaker cabinet as well as use your internal combo. speaker as a cabinet for an external amp.

Can I run my combo amp's signal to both the internal speaker and an external speaker at the same time?No, the Combo Amp Extension Box is designed to cut signal to your combo's internal speaker whenever a speaker cord is plugged into the "Ext Speaker" jack.

Can I run my combo amp and an external amp into the combo speaker at the same time?No, the Combo Amp Extension Box cuts the signal from the internal amp whenever an external amplifier is plugged into the "In from ext amp" jack.

To install the Combo Amp Extension

Box:

Remove the wires connected to the selected combo amp speaker terminals. Be sure to make note of positive and ground wires.

Attach the wires coming out of the amp to the "From Amp" spade connectors on the Combo Amp Extension Box. Be sure to connect positive to positive and ground to ground (typically positive is noted by the color red, where ground is noted by the color black).

Connect the "To combo Speaker" wires to the speaker terminals that you removed connections from in step 1 above.

Use the Velcro on the back of the box to fix the unit to an easy-to-reach position on the amp.

BE SURE TO MATCH THE IMPEDANCE of any connected speaker cabinets to the internal speaker load (ie, 4,8, 16 ohms).

Mismatching the load of an external speaker may result in damage to your amp.

It the spade connectors are loose, you can tighten them by using pliers If you are using an external amp do not exceed the combo speaker's wattage rating.