QSC MX700 2-Channel Pro Power Amp

Working unit that has been treated well and operated responsibly. Has been used mostly in studio. Some scratches from racking. Can be 2-channel, stereo, or mono-bridged.

These are solid, dependable, nice sounding amps.

Factory STATS

OUTPUT POWER (per channel)

8 ohms, 20 Hz to 20 kHz, 0.1% THD, 150 watts

8 ohms, 1kHz, 1% THD, 170 watts

4 ohms, 20 Hz to 20 kHz, 0.1% THD, 225 watts

4 ohms, 1 kHz, 1% THD, 270 watts

2 ohms, 1 kHz, 1% THD, 350 watts

OUTPUT POWER (bridged mono)

8 ohms, 20 Hz to 20 kHz, 0.1% THD, 450 watts

4 ohms, 1 kHz, 1% THD 700 watts

DISTORTION:

SMPTE-IM, less than 0.025%

THD 20Hz-20kHz less than 0.1%

0.01% typical

FREQUENCY RESPONSE:

20 Hz to 20 kHz, +0/-1 dB

8 Hz to 100 kHz, +0/-3 dB

DAMPING FACTOR:

Greater than 200

DYNAMIC HEADROOM: 3 dB at 4 ohms

NOISE: 100 dB below rated output (A weighted)

SENSITIVITY: 0.96 Vrms for rated power (8 ohms)

VOLTAGE GAIN: 35 (31 dB)

INPUT IMPEDANCE: 10K unbalanced, 20K balanced

CONTROLS:

Front: AC Switch, Ch 1 and Ch 2 Gain Knobs

INDICATORS:

PWR-ON: Green LED

CLIP: Red LED

CONNECTORS: (each channel)

Input: Barrier strip and 1/4" RTS

Speakers: "Touch proof" binding posts

COOLING: Two-speed fan, rear-to-front air flow.

AMPLIFIER PROTECTION:

Full short circuit, open circuit, ultrasonic, and RF protection. Stable into reactive or mismatched

loads.

LOAD PROTECTION:

AC coupled output. 2-second turn on and instant off muting

OUTPUT CIRCUIT TYPE:

Complementary linear outputs, grounded collector, class A/B

POWER REQUIREMENTS: 100,120, 240 Vac, 50-60 Hz

POWER CONSUMPTION:

Normal Operation: 4 ohms per channel: 3.7 amps, 120 Vac (444VA). Maximum (full power, 2 ohms

per channel): 14.6 amps, 120 Vac (1752 VA)

DIMENSIONS:

19.0" (48.3 cm) rack mounting

3.5" (8.9 cm) tall (2 spaces)

12.0" (30.5 cm) deep (rear support ears)

WEIGHT: 25 Ibs