Very powerful clean power amp that is perfect for people using amp modelers or always on preamp pedals that are the main workhorse of your tone. 700 watts per channel @ 4 ohms. There is a 3 band EQ on the front for quick adjustments for the room when you are playing live or practicing! There is an integrated cab sim on both DI outs that can be switched on and off should you choose to use them. I usually did and they sounded great. It has spent its life in the rack case that it is currently pictured in, but I would ship it in the original box with the rack ears! This is a stereo power amp so you have the capability to share it between 2 people simultaneously. Very light and compact! I'm only selling it because I am switching to a more compact, pedalboard only setup.

A Ton of Power for Your Pedal-based Rig

Seymour Duncan's PowerStage 700 is a miniature power amplifier engineered to attain the best tone and performance from your pedal-based electric guitar rig. Small enough to fit into your gig bag at the end of the night, the PowerStage 700 still pumps out an astounding 700 watts — more than enough to power any combination of guitar cabinets. And the onboard stereo I/O, cab-simulated output, and 3-band EQ make it extremely versatile, no matter what pedals you are using for your front end. The PowerStage 700 is the performing guitarist's new favorite tool.

Note: This device is intended to drive a speaker cabinet and should not be placed in front of an amplifier or pedals.

700 watts per side of clean power

More and more guitarists are getting hip to the great guitar tones that can be achieved by running your favorite guitar pedals — especially the amp-in-a-box variety — directly into a great power amplifier. That's exactly what the PowerStage 700 is designed for. By utilizing this setup, your stompbox tones receive enough juice to scream through anything from a compact 1 x 12-inch cab to a wall of 4 x 12-inch cabs. This makes the PowerStage 700 a favorite among traveling guitarists who rely on rented backlines and many of the gigging players around

Convenient size

Unlike the heavy and large solid-state power amplifiers of the past, the Seymour Duncan PowerStage 700 is housed in a compact and attractive enclosure that looks great when standing on its own. Not only that, but the PowerStage 700 is a featherweight. When you're done pummeling your audience's ears at the gig, this amp will slip easily into your gig bag without undue stress on your shoulder. And it's easily rackmounted for convenience.

Plenty of tone-shaping power

The Seymour Duncan PowerStage 700 is engineered to get the very most from your pedalboard. And thanks to a bevy of onboard features, it sounds great as its own clean channel as well. The stereo inputs and outputs allow for a discrete stereo or wet/dry rig. The onboard 3-band EQ works with the power stage to match up to any cabinet. And the cab-simulated output makes running directly to the board a convenient and great-sounding option. No matter what you're running on the floor, the PowerStage 700 will handle it flawlessly.

Seymour Duncan PowerStage 700 Features:

• Compact power amp for a pedal-based guitar rig
• 700W of power per side easily drives any amp cabinet
• Small enough to fit in a backpack or gig bag and easily rackmountable for more permanent rigs
• Discrete stereo inputs and outputs for getting the most from your pedals
• 3-band EQ in the power section available to dial your cabinet's tone with each venue
• Selectable cab-simulated outputs are fantastic for going direct

Tech Specs

• Type:Solid State Class D
• Number of Channels:Stereo (Left/Right)
• Output Power:700W per channel @ 4 ohms
• EQ:3-band EQ
• Amp Modeling:Switchable True Cab Circuitry Simulation
• Inputs:2 x 1/4" TS (L/mono, R)
• Outputs:2 x SpeakON (L/R speaker out), 2 x XLR (L/R line out)
• Effects Loop:No
• Power Source: Standard IEC AC cable
• Height:2.2"
• Width:11.5"
• Depth:6.9"
• Weight:6.3 lbs.