We have received a 1973 Gibson ES-150D Walnut, as indicated by its serial number and pot date.

This model was manufactured from around 1969 to 1974. It features a double cutaway and an ES-335-like shape, but is characterized by its thick body and full-acoustic construction without a center block.

The wood configuration features a laminated maple body, a 3-piece mahogany neck typical of Gibson guitars from this era, and a rosewood fingerboard.

It is equipped with gsticker-numbered PAFh pickups.
It produces a moderately warm and sweet tone, yet also has a unique, mature, and crisp nuance, making it very easy to play.

Although some pot dates are obscured, the year 1973 is confirmed on four of them.
Master Volume: 137 7325
Front Volume: 137 7325
Front Tone: 137 73xx
Rear Volume: 137 xxxx
Rear Tone: 137 7325

The frets, nut, and master volume knob have been replaced, and the fingerboard has been repaired.

Different tuning pegs were installed at some point in the past, but they have now been replaced with the originals.

There is a crack on the back of the headstock near the 6th to 4th string tuning pegs.
While there are some signs of wear, such as scratches and dents, the guitar remains in fairly good condition considering its age.

With its double-cutaway design and master volume control, this is a very easy-to-play full-acoustic guitar.

Please take this opportunity to consider purchasing it.

* Please note that due to the nature of this product, we are unable to transfer it between stores.
Images pending
Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: 130848
Year of Manufacture: 1973
Country of Manufacture: United States
Case: Hard case
Weight: 3.02 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 40.1 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 24.1 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Frets, nut, master volume knob, fingerboard correction
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: Crack on the back of the headstock near the 6th to 4th string tuners

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, or string action were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind piece, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.