The RXLRWS1 XLR Wireless System enables vocalists and techs to connect a dynamic microphone to a mixer, audio interface, soundboard, PA system, or DSLR camera without using a cable, delivering robust audio transmission up to 150 feet. Unlike traditional cables, this system provides full freedom of motion on stage, eliminating the possibility of tangles, trips, and accidental unplugging. For shooting video, it allows a camera operator to change position without altering audio perspective. Moreover, wireless connection to a PA speaker makes it possible for performers to take their mic into the audience section during soundcheck in order to hear their stage sound. In addition to handheld microphones, this system also transmits audio from digital and analog music players or any similar device with an XLR output. There are seven frequency channels, selectable using a button on the transmitter and receiver, to help users avoid interference on crowded frequencies. Access to multiple channels also makes it easy to switch the mic connection to a different receiver. (For example: if one mixer is on channel 1 and another mixer is on channel 2, switching the mic between channels 1 and 2 will alternate between those mixers.) The system’s 2.4 GHz wireless band maximizes signal integrity even in busy environments. Built-in rechargeable batteries provide 5.5 hours of use on a full charge. And the included USB-C charging cable conveniently charges the transmitter and receiver at the same time.