Easily configurable through the Darkglass Suite, the Darkglass MIDI Footswitch offers customizable MIDI commands at the tips of your toes. The MIDI footswitch is quick to set up with ready-to-use templates for Darkglass products. A more complex custom MIDI setup is also available with commands on the main and sub operational layers, simultaneous sending of several messages and more, making it a powerful command center that integrates seamlessly with your setup.

The MIDI footswitch can be powered flexibly through either a 9V DC or USB. In addition, the Darkglass amplifiers are capable of powering it through the same 1/4″ plug or a 7-PIN MIDI connector used for the data, offering the full operation using only one cable.

MIDI OUT/THRU

7/5-pin DIN connector

• Connects to Darkglass amplifiers or pedals that have a MIDI IN connection.
  When connected to a Darkglass e500 or Infinity Combo amplifiers with a 7-pin MIDI cable no external power supply is required.
• Can be used with 5-pin MIDI cable for connecting to any other generic MIDI device.

MIDI IN

5-pin DIN connector

• Connects to a MIDI OUT on another MIDI device
• Passes the MIDI messages through to MIDI OUT/THRU connector.

USB
USB-C connector

• Connects to a computer for setting the configuration using Darkglass Suite.
• Can be directly connected to Darkglass e500 amplifier for syncing settings.
• USB power banks and chargers can be used as the power source for the footswitch.

9V DC
Barrel jack connector (center negative)

• Can be powered with a generic power supply.

Darkglass Amplifier
1⁄4” TS jack connector

Connects to FOOTSWITCH connector of Darkglass amplifiers.

• Works as a Darkglass Super Intelligent Footswitch.
• When used as Super Intelligent Footswitch no external power supply is required.

Dimensions
Width: 276 mm / 10.8″
Length: 54 mm/ 3.1″
Height: 54.6 mm / 2.1″
Weight: 150 g / 0.33 lb