Pair Presonus Eris 3.5BT 2nd Gen 3.5" Studio Monitors Speakers w/Bluetooth+Mixer

Package Includes:

• (1) Pair Presonus Eris 3.5BT 2nd Gen 3.5" Studio Monitors Speakers w/ Bluetooth
• (1) Rockville RockMix 2BT 2 Channel USB Interface Mixer, 2-way Bluetooth For Podcast
• (2) Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper

Description:

PreSonus Eris 3.5BT studio monitors are the perfect way to bring studio-quality sound to your home. With Bluetooth wireless connectivity, you can stream your favorite music from any device, and with their 50W of onboard Class AB power, you can enjoy loud, clear audio without any distortion.

The Eris 3.5BT studio monitors are also perfect for gaming and content creation. Fine-tune the speakers' response to your exact needs with low- and high-frequency tuning controls or listen to your music in private with the integrated headphone amplifier.

The Eris 3.5BT speakers are also incredibly versatile. They're small enough to fit on any desk, but they're powerful enough to fill any room with sound. They’ll look great in any environment with their elegant design.

Features:

• 3.5-inch, woven-composite, low-frequency transducer
  
• 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
  
• Fast, reliable, stereo Bluetooth 5.0 wireless input
  
• 50W (25W/side) Class AB amplification
  
• 80 Hz to 20 kHz frequency response
  
• 97 dB SPL (Peak, @ 1 meter)
  
• High- and low-frequency Acoustic Tuning controls
  
• Balanced, ¼-inch TRS inputs; unbalanced, ?-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ?-inch output
  
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
  
• Power Saver mode (engages after 40 minutes)
  
• Comes with speaker wire, ?-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

What's in the Box:

• Mixer with USB Recording Interface
• USB Cable
• USB Power Adapter
• 4 Non-slip Rubber Pads
• Owner Manual and Warranty Card

Description:

Introducing the Rockville RockMix 2BT 2-Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface and Bluetooth—your ultimate audio companion for professional-grade recordings, live streams, and performances. Whether you’re a seasoned musician, podcaster, or content creator, this compact mixer packs a punch with its versatile features.

Versatile Inputs:

• Channel 1 (Microphone): Equipped with an XLR input, perfect for your dynamic or condenser microphone.
  
• Channel 2 (Mic/Instrument): A switchable input that accommodates a microphone, instrument, or any other audio device. Whether it’s your acoustic guitar or a second mic, the RockMix 2BT has you covered.
  

Bluetooth Convenience:
The built-in Bluetooth 5.0 lets you wirelessly stream music. Imagine playing backing tracks from your phone or collaborating with fellow musicians—no cables required.

Phantom Power:
Both channels offer +48V phantom power. Ideal for condenser microphones, it ensures pristine audio capture.

USB Audio Interface:
Connect the RockMix 2BT to your Mac or PC via USB. It becomes your plug-and-play audio interface. Record directly into your favorite DAW—the stereo master output ensures high-quality results.

Power Options:
Use USB bus power from your laptop or plug it into a standard 5V power supply (included). Low power consumption means flexibility—power it up wherever you are.

Compact Design:
The RockMix 2BT’s super-mini form factor fits neatly on your desk. It’s designed for home studios, live streams, and impromptu recording sessions.

Outputs:

• RCA (L&R) Outputs: Send your master mix to an amplifier, powered speakers, or a recording device.
  
• 3.5mm Headphone Output: Monitor your mix privately.
  
• Additional 3.5mm Mic Input: Connect an extra microphone alongside the two main channels.
  

Sound Customization:

• Each channel features a 2-band EQ for fine-tuning. Adjust bass and treble to your liking.
  
• Pan and level controls give you precise control over your mix.
  

User-Friendly:
No external drivers needed for Mac or PC. It’s all about simplicity and efficiency.

Summary:
The Rockville RockMix 2BT isn’t flashy—it’s functional. It quietly empowers your music-making process. Find it on Rockville Audio and let your creativity flow.

Recommended Applications:

• Two Person Live Stream/recording (Zoom, podcast, etc)
  
• One instrument and one singer who wants to record or live stream or perform live

Features:

• Rockville RockMix 2BT 2 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface and Bluetooth
• Built in Bluetooth 5.0 wireless music streaming
• Switchable +48v Phantom Power on both channels for use with condenser microphones
• Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks
• Channel 1 is a microphone channel
• Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
• Independent Level Controls for Main and Headphone/Monitor Outputs
• Integrated Plug-and-Play USB Audio Interface for Mac & PC
• USB Interface will send the master output in stereo to your DAW so you can record and/or stream your mix
• Operates on USB BUS Power or 5V DC External Power Supply (Included)
• Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
• Super mini 2-channel mixing console designed for home studio recordings or live broadcast streaming
• RCA (L&R) outputs allow you to send the master output to an amplifier, powered speakers, recording device, etc
• 3.5mm headphone output
• Additional 3.5mm mic input allow you to connect an additional microphone in addition to the 2 main channels
• Each channel has a 2-band EQ to customize the sound
• Each channel has pan and level controls
• USB playback switch assigns the signal to the MAIN MIX or MONITOR
• Monitor/headphone level control knob
• Main mix level control knob
• No external drivers are needed for mac or PC

Specifications:

Sensitivity/impedance:

• CH1 & CH2 XLR: 2mV/1.8k ohm(gain max)
• CH1 Jack: 10mV/ 12k ohm(line)
• CH2 Jack: 30mV/ 20k ohm(line), 30mV/240k ohm(guitar)
• Output Level: 5.8V max(main, monitor)
• Frequency Range: 20-22000Hz
• THD: <= 0.05%
• S/N Ratio: 80dB

Equalizer:

• Bass Range: ±15dB/80Hz
• High Range: ±15dB/12kHz
• Headphone: Impedance: >=16 ohm
• USB Interface: USB1.1 compatible, 16-bit delta-sigma, 44.1kHz sampling rates, 48kHz max.
• Phantom Power: +48V
• Power Supply: USB 5V 500mA Via USB Port of Computer; Via USB Power Adaptor; Via power bank
• Operating System: Windows 2000, XP or higher; Mac OS 9.0.4 or higher, 10.X or higher
• Item Dimensions (inches): 3.9” x 5.3” x 1.65”
• Item Weight: 0.95lb

Video of RCDR10B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper
• Nickel-Plated for Rugged Durability and Efficient Signal Transfer
• 100% Copper Conductors for Enhanced Signal Clarity
• OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
• Length: 10 Ft
• Color: Black