2-in-1 Footswitch (2 button latching and 1 button momentary tap tempo)

This is a combination 2-in-1 footswitch, meant to reduce the amount of space used on a pedal board. It is a latching 2-button footswitch and a momentary/tap-tempo in one enclosure.

The bottom two switches are latching on/off switches, which correspond to the right TRS jack. The right footswitch (blue LED) shunts the tip to sleeve, while the left footswitch (green LED) shunts the ring to sleeve.

When the switches are in the "closed/shunt" position, their respective LED illuminates.

The LED's are wired independently of the TRS jack and can be externally powered via any common boss-style 9v adapter. External power is not necessary for the switches to function.

The top footswitch is a tap tempo or "momentary" switch. It is a "normally open" momentary switch and is wired to the left jack. When depressed it shunts the tip to the sleeve.

The enclosure is a 125b-style aluminum enclosure and is powder-coated.

Hand wired in Canada.

*Note* Pedal building is a hobby for me. All of my items are handmade unless otherwise stated. As a result, they may have tiny dings or small surface scratches due to the manufacturing process (clamping for drilling, etc) or other artifacts such as pencil lines from marking drilling locations. I do my best to take quality pictures in order to accurately represent the condition of my items listed. Some select parts, such as transistors, opamps, or diodes, may vary from the ones used by the original manufacturer. This is usually due to the scarcity of vintage semiconductors. I try my best to use equivalent parts whenever originals are not available and hand test them with either a vintage RCA WT-501A, B&K 520B, or B&K 530 transistor tester. All of my pedals run on a standard boss-style 9vDC center-negative external power adapter, unless otherwise stated. If you have any questions about a specific item, please don't hesitate to ask.

Happy shopping,

-Brad B.