The sE Electronics DM2 is a Dynamite Active In-line Mic Preamp with Selectable Gain and Impedance Switchable, clean and consistent gain from moderate +15dB to explosive +30dB with a sophisticated class-A design and specially-selected high-grade FETs, so active inline preamps have vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain provided is always consistent regardless of the connected load, thanks to the DM2's eight switchable impedance setting and the DM1's dedicated buffer amplifiers.

Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide a significantly improved level to your preamp all without adding noise or coloration.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by a roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

DM2 TNT

sE Logo Sticker

User manual with warranty card

Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)

Gain: 15 dB / 30 dB

Max output level (0.5% THD): 9.5 dBV (3.0 V)

Output Noise Level: 1 μV @ 15 dB / 6.6 μV @ 30 dB

Powering: 48 Volts according to IEC 61938

Electrical Impedance: 135 Ohms

Recommended Load Impedance: > 1k Ohms

Current Consumption: 3.1 mA

Connectivity: 3-pin male/female XLR connector

Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)

Weight: 80 g (2.82 oz.)