Korg Trinity DW8000 DW6000 N264 N364 EX8000 DS8 - Battery 3V Replacement Repair Fix

Brand: Korg

Model: Trinity DW8000 DW6000 N264 N364 EX8000 DS8

Including: 

√ NEW 3V Coin Cell Battery CR2032 

√ Lead wires to connect externallly from PCB point

Installation:

1. Turn off and unplug the unit

2. Open unit and locate the battery

3. Make note of the position of positive and negative pins of the battery

4. Cut the original battery from circuit board, desolder the remaining battery pin leads from the circuit board

5. Solder in the battery holder wire leads with notes above with positions.

6. Mount the battery holder, insert the new battery into the battery holder

7. Be sure not to short out the battery pins located on the underside of the battery holder on any metal on your synth

Info and compatibility

Your device starts to behave odd or getting messages, that the internal battery is low, then it is maybe time to change the battery and put new life into your device.

For Ada Mp1 Mp-1

For Akai AX-60 AX-73 AX-80 XR-10

For Alesis QS6 QS7 QS8 D4 DM PRO MIDIVERB IV SR16 ANDROMEDA DM5

For Boss DR-660/670 SE-50 SX-700 DB-12 DB-30 TU-10

For Ensoniq SQ-1, SQ-2, SQ-R, KS-32, DP-2, DP-4, DP Plus, VFX

For Kawai K1 ii K1R K1M

For Korg DW6000, DW-8000, Poly-800 MKII, O1W - M3 - POLY 800 - T1 T2, M1 M1R, M1REX, Wavestation, Triton T Series X5D X5 POLY 800 N264 N364 Trinity DS8 01W

For Lexicon Pcm81 Pcm-81

For Oberheim Matrix 6, 6R, 1000 Xk Cyclone

For Roland TR-505, MKS-20, MKS-50, MKS-100, S-10, Juno-106, Alpha, Juno-1, Juno-2, D50, D550, D10, D20, D110, JD800, JD990, JV1080, JV2080, JP- 8000, JP8080, XP-10/30/50/60 U-110 MT-32 JV-880 MC-303 U20 SPD-8 SPD-11 SPD-20 JS-30 GP-100 GR-30 VS-1680 VS-2480 XP-80 XP-50 XP-60 XP-10 SC-30/SC-50/SC-55/SC-155/SC-88VL 

For Yamaha DX7, TX7, DX21, DX27, DX100, RX15, RX17, RX21, SY77, TG77, TX802, TX81Z, RX11, RX21, RX5, RX120, RY10, RY20, RY30, RX15, RX17, RX21L, TG33 SY35 SY55 SY77 SY99 EX5 EX5R EX7 SPX900, SPX90, SPX90II, SPX1000, SPX50D, REV5, REV7 KX88 RX DX DX7 RY-10 RY-20 RY-30 DX11

..... along with many others that use a 3V CR2032 battery

░░░░░░▒▒▒▓▓Disclaimer▓▓▒▒▒░░░░░░

Installation of this part along with any associated risks involved in the process are the responsibility of the buyer. Be sure to back up any data and unplug the unit before installation. Once installed, any future battery replacement is simplified.

░░░░░░▒▒▒▓▓Important notes:▓▓▒▒▒░░░░░░

⸎ Backup any data you don't want to lose before starting