Hello and welcome to The House of Chrome.

    If you are looking for something a little different for the vintage mic collection then you might want to consider this very unique and rarer Altec 660A Dynamic microphone manufactured in the late 1950's to mid 1960's. The mic has a very modern / contemporary design that was a signature part of Altec's line up. Very similar to the more common Altec 633A model but smaller and has a different paint scheme. It comes with all the accessories shown including the rare lower Altec on / off adapter period Altec 24A desk stand and cable in which to operate. This 660A model was a short run microphone.

 It should be noted that this mic has been tested and does work. That being said I would rate the signal strength at around 70%. You can use this but I have heard stronger examples. 

 This style of mic was very popular in the 1940's to 1950's but the design of microphones had changed drastically by the 1960's where stick mics were far more desired so this 660B didn't sell as well and was probably only sold for 5 years or less before being discontinued so you just very rarely see these around.

 This mic was called a "salt shaker" due to it's very unique and obvious styling. This particular model has a silver / grey paint scheme. It was the replacement for the 633A and has the same overall design. The front grill has the 3 propeller design which was originally based on the radial engines of airplanes from the 1940's and very nostalgic. 

 Even if you choose not to actually use the mic it will make an incredible display piece anywhere in the home, office or studio.

 You'll notice right away that the 660A and 24A stand are in very good overall condition and certainly way above average though the mic shows a bit more wear. There are typical small scratches and tiny paint chips on the mic but it's free of dents, fractures or corrosion. I'd rate the condition of the mic a true 7 and stand a true 8. These older mics and stands are usually in very rough physical condition. The Altec mic has a legible logo and 100% complete. The lower joint mechanism allows the head of the mic to tilt forward and backwards with ease. No issues. The mics cable is just 2 feet long and exits out the rear of the mic, down through the on / off adapter and out the bottom of the base. 

 The cable is soft, pliable and works perfectly. It has the quality male Switchcraft XLR end connector. Simply attach any longer XLR cable of choice and you're in business.

 The mic comes with a lower satin chrome Altec on / off adapter that works perfectly. it gives the user some decent height and angle to work with. It's a rare accessory that you don't see too often and this one is in superb condition.

 The cable is soft, pliable and shows no exterior wear. It comes with a vintage quality Cannon female XLR end connector that's properly wired and completes the look of this display piece.

 The base is quite heavy and has a beautiful paint scheme. It's the older cast iron 24A type with the opening that runs the length of the stand giving it a lot of character and making it very practical for seating / hiding the cable. It comes with the 3 original pads on the bottom as well that are in excellent shape. This cast iron base has slight imperfections but otherwise is quite beautiful and makes for a very stable platform making it almost impossible to flip over.

 The dimensions of the mic with stand are appx 11 high X 4 1/2 wide X 7 inches deep. Weighs roughly about 5 pounds total so foreign shipping will be a bit spendy due to much higher shipping prices as of lately.

 These older Altec model mics seem to be even more collectible than the Shure 55S interestingly enough and harder to come by. They keep rising in value so this is a good investment at the end of the day. Very few collectors will have this combo to display. 

                As with all my vintage items...

 I can promise you will be happy with it for the price paid. If not...I have a no hassle return policy. The shipping will be on you as I believe that's fair but the purchase price would be refunded. Simply return in the same nice condition...period. Check my rating. INTERNATIONAL BUYERS are welcome as well. Buyer must pay within 24 hours or an unpaid case will be opened and item relisted. Domestic buyer will get priority shipping.

  If you have any questions feel free to ask and...thanks for looking.

Promoted similar listings













Listed5 months ago
ConditionVery Good (Used)
Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more
Brand
Model
  • 660A
Finish
  • Silver
Categories
Year
  • 1960's
Made In
  • United States

Product safety information may be available here.

The House of Chrome

Escondido, CA, United States
Joined Reverb:2018

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.