Boffin FX Guitar Treble Bleed Circuit Direct Mount 1,326 Hz (Blue) for Vintage Output Pickups Humbucker and Single Coil
Direct Pot-Lug Mount | 1,326 Hz Blue Voicing for Vintage Output Pickups & Humbuckers (Up to 10K)
Never lose your high-end clarity when rolling down your volume knob! The Boffin FX Treble Bleed Circuit (Direct Mount Edition) is engineered to eliminate high-frequency roll-off, delivering crisp top-end sparkle, note definition, and consistent tone at any volume setting.
Featuring direct-mount PCB solder pads spaced 7.9 mm (3/10 in.) apart, this compact module solders directly across lugs 2 and 3 of your volume potentiometer for an ultra-clean, wire-free installation—or can easily be wired using standard hookup leads.
🎛️ Key Features & Player Benefits
- 🟦 1,326 Hz Blue Voicing: Specially tuned cutoff frequency optimized for vintage and medium-output pickups (up to 10K DC resistance). Perfectly complements single-coils and humbuckers on Strat-style, Tele-style, and LP-style guitars.
- 🔊 Pristine Low-Volume Clarity: Preserves highs and signature top-end bite as you back off your volume control, ensuring every note remains articulate, balanced, and clear.
- 🛠️ Direct Pot-Lug Mounting: Features solder pads spaced 7.9 mm (3/10 in.) apart for direct attachment onto volume pot lugs, making installation fast, neat, and wire-free.
- ⚡ Premium Component Architecture: Precision-matched 0.001 µF capacitor and 120K resistor network for smooth, natural high-end restoration.
- 🔌 Flexible Hookup Options: Solder directly onto pot lugs for a clean mount, or connect via hookup wires using the dedicated input and output solder pads.
📊 Technical Specifications
• Cut-off Frequency: 1,326 Hz (Blue Voicing – Vintage Output Pickups up to 10K)
• Pickup Compatibility: Vintage-Output Single-Coils & Humbuckers (Up to 10K DCR; Strat, Tele, & LP-Style Guitars)
• Circuit Components: Premium 0.001 µF Capacitor & 120K Resistor
• Mounting Style: Direct Mount (Solders directly to volume pot lugs 2 & 3 or via hookup wire)
• Pad Spacing: 7.9 mm (3/10 in.) between solder pad centers
• Board Dimensions (L × W): 28 mm × 23 mm (1-1/10 in. × 9/10 in.)
• Origin & Quality: Hand-Assembled & Tone-Tested by Boffin FX in Henderson, Nevada, USA
🛠️ Quick DIY Installation Guide
- Align the module’s solder pads with Lug 3 (Input) and Lug 2 (Output/Wiper) of your volume potentiometer.
- Solder the pads directly to the pot lugs (or connect using short hookup wires to the IN and OUT pads).
- Roll down your volume knob and experience crystal-clear top-end definition at any volume level!
🛡️ Hand-Assembled & Quality Tested in Nevada, USA!
🚚 Ships FAST & FREE from Nevada, USA!
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.

