I have no use for the antennas anymore. These are not amplified. PRICE IS PER UNIT

The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional

pattern over a broad frequency bandwidth. Many “gain antennas” (those designs with a directional pattern) are limited in bandwidth, making them awkward for use in multi-channel wireless systems and with frequency agile wireless systems. With VSWR below 2:1 from 450 to 862 MHz, the broad bandwidth of the ALP Series covers a broad section of the band used for Lectrosonics wireless microphone and IFB systems, yet still provides the directional pattern needed to cover long distances.

All ALP Series antennas are constructed of 1/8” FR4 fiberglass circuit board material and are extremely rugged. The ALP620 antennas include a protective cover over the BNC connector, making them suited for field production. The perforated body of the ALP620 makes it resistant to wind loading outdoors.

The antennas can be mounted horizontally or vertically by removing four screws and repositioning the mounting block. This helps to position the antenna away from nearby reflective surfaces to preserve more of the natural pattern of the LPDA design.

ALP620 Specs

Pattern Gain: +7dBi (isotropic)

+4dBd (over dipole)

Range: 450-862 MHz

Weight: ALP500: 14.2 oz.

ALP620: 9.4 oz.

ALP650/E Series: 12 oz.

Connector: 50 Ohm BNC

Dimensions: 12” high x 10.5” deep x 1.5” wide