MDLR Eurorack case 12U/104HP Performer Series Pro including power adapters
Our users rate Reverb
Selling my beloved Eurorack case 12u 104hp performer series pro. Everything working, all pins working perfectly and providing power. Comes with the two power bricks, ready to use.
Original description from the website:
- 12mm birchwood fully nailed and glued construction
- Sprayed with special 2-layer black protective coating
- Detachable middle ring/spacer allows modules to be fully-patched during transport
- Spacer functions as a rock-solid stand when the case is open
- Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
- Top and bottom sections can be detached and set up side-by-side as two separate 6U cases
- Eight 104HP rails with M3 threaded inserts
- Two MDLR PWR powered busboard, (80 power headers in total)
- Two side-mounted power switches + powerinlet
- Two 1.8m power cords
- High-quality Penn Elcom components
- Super-comfortable Luxe carrying handle
- Anti-slip rubber feet
- Completely assembled, wired, tested, and ready to play!
Dimensions (L/W/H)
- 59,5 cm x 33 cm x 25,5 cm
Total Weight
- 9.8 kg (includes rails, power supplies and other hardware)
Module depth
- 7 cm available depth between top of rail and bottom of case
- 5,4 cm available depth between top of rails and top of shrouded header
- 4.2 cm available depth between top of rail and power supply
Power Supply Options
MDLR PWR powered busboard 45W version.
MDLR PWR is a high precision low noise and high power bus board for your eurorack modular systems. With a total of 40 headers you’ll never run out of connectivity, so all your lovely modules can be easily connected.
Due to super easy installation (it’s only about connecting two cables) this MDLR PWR PSU solution is perfect for use in DIY projects as well.
By using an external PSU adapter there is no risk of high voltages inside your eurorack case.
MDLR PWR is fully protected on the input as well on the output to ensure maximum security.
Technical specifications:
- Power 45W
- Dimensions 420 x 140mm
- Height 23mm
- Weight 400g
- Outputs:
- +12V / 2A
- -12V / 1.2A
- +5V / 1.5A
- Output stability ±1% for 0-100% load
- Input 18V ( 16V – 20V )
- Output Connectors 40 x 16 pin IDC for flat cable
- Input connectors WAGO spring terminals + 5.5 / 2.1 DC inlet
Protections
- Input overvoltage
- Input reverse polarity
- Output overvoltage
- Output short current – automatic recovery
- Output over current – automatic recovery
- All output protections are independent for each rail
- Efficiency 92%
Other Input common-mode LC filter with high efficiency of canceling noise and interference from input connector
- Additional input filter on each regulator for minimal output noise and interferences
- Shield for reducing RF interference from regulators
- Star distribution topology on PCB
- Each “beam” from star topology has 4 headers with noise canceling capacitors.
- In star topology center are another noise canceling capacitors
- A big ground plane on both sides of PCB
- Blue LEDs indicate present and drop of output voltage
- Recommended power brick for one board – Mean well GSM60A18-P1J
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Listed | 21 hours ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.
