Roland D10,D20,D50 Volume Slidepotentiometer - EWANA0X10B14

Stereo slide potentiometer with 30mm travel and 10mm Lever. Suitable Slider for

Volume Control for

• Roland D10
• Roland D20
• Roland D50

Please note: the original lever (sliding pin) is slightly thicker.
The cap will sit loosely with the new Potentiometer. This can be remedied with a little paper, for example.

Electrical properties:

The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.

Appearance (technical characterisation):

This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.

The slide potentiometer has a travel of 30 mm. 

In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.

Useful hint:

The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.