EarthQuaker Devices Sunn O))) HalfLife - Octave Distortion + MOSFET Booster

Life Pedal V3 circuit · White Face / RAT-style distortion · Analog octave-up · Shin-Ei / Super Fuzz territory · 3 clipping modes · MOSFET clean boost · Expression · Flexi-Switch · 9V 15mA

The EarthQuaker Devices Sunn O))) HalfLife is the most compact version yet of the Life Pedal concept, created with Sunn O))) to bring the band's extreme amp-pushing gain chain into a far more pedalboard-friendly format.

Half the size, just as heavy.

Its origins go back to the Life Metal sessions, where Stephen O'Malley and Greg Anderson worked with Steve Albini to build huge layers of saturation, harmonics, feedback and dynamics through Sunn Model T amplifiers and mountains of additional gear. The Life Pedal was created to capture part of that front-end chain. HalfLife takes the same concept and compresses the core Life Pedal V3 circuit into a much smaller enclosure.

The signal path is straightforward:

Octave > Distortion > Boost

The Amplitude section combines an analog octave-up with distortion based on the classic "White Face", the vintage ProCo RAT circuit. This is not simply a downsized RAT. EarthQuaker modifies the clipping section, adds the octave blend and lets the circuit move from gritty drive through massive distortion, fuzz and much more broken textures.

The Octave control progressively blends in an analog octave-up generated by an all-discrete full-wave rectifier. It is monophonic and, like classic analog octave fuzz circuits, responds particularly well to single notes, neck pickup settings and playing above the 12th fret.

With Octave fully up, HalfLife moves deep into Super Fuzz territory, producing aggressive upper harmonics, clang, intermodulation and a much more fuzz-like texture. Play chords and things become deliberately chaotic.

The Octave blend can also be controlled with an expression pedal, making it possible to gradually bring upper-octave harmonics into riffs, sustained notes and drones.

The distortion stage offers approximately +60dB of gain and three clipping modes.

OpAmp removes the clipping diodes and lets the op-amp itself do the work, producing the loudest, most open and aggressive response.

Asymm uses two silicon diodes and one LED in an asymmetrical configuration. It is smoother and slightly more compressed, with a response closer to a pushed tube amplifier.

Symm uses the traditional pair of silicon diodes for the tighter compression and crunch associated with the classic White Face circuit.

The Filter follows the familiar philosophy of this distortion family. It is a low-pass filter with a range of approximately 500Hz to 30kHz. Counterclockwise allows more high frequencies through, while clockwise progressively darkens the sound.

After the distortion comes Magnitude, an independent all-discrete MOSFET booster. It is a clean, high-impedance boost with very little coloration of its own. Its job is not to create distortion by itself, but to deliver enough output to hit the next stage hard and push amplifier preamp tubes further into saturation.

The Octave/Distortion and Booster sections can be used independently or stacked for the complete HalfLife gain chain.

HalfLife also features EarthQuaker Devices Flexi-Switch technology. Each footswitch works in both latching and momentary modes. Tap once for normal on/off operation, or hold the switch down and the effect remains active only until you release it.

While its Sunn O))) connection naturally puts HalfLife in doom, drone, sludge and stoner territory, the circuit is much broader than that. With little or no octave it works as a powerful RAT-style distortion. Lower gain settings produce gritty drive. Adding octave opens up broken 60s-style fuzz and garage textures. Push everything and it becomes a wall of harmonics.

Key features

  • Official Sunn O))) and EarthQuaker Devices collaboration
  • Compact evolution of the Life Pedal concept
  • Same core circuit as Life Pedal V3
  • Standard-production successor to the limited HalfLife Fer MMXXV
  • Signal path: Octave > Distortion > Boost
  • Distortion inspired by the classic ProCo RAT "White Face"
  • Approximately +60dB of gain
  • All-discrete analog octave-up
  • Shin-Ei FY-2 / FY-6 / Super Fuzz sonic territory
  • Blendable octave
  • Expression input for Octave control
  • 3 clipping modes: OpAmp, Asymm and Symm
  • Low-pass Filter with approximately 500Hz to 30kHz range
  • All-discrete MOSFET booster
  • Clean, high-impedance boost
  • Octave/Distortion and Boost can operate independently
  • Flexi-Switch latching and momentary operation
  • Relay-based true bypass
  • Designed to hit tube amplifiers extremely hard
  • Excellent for doom, drone, sludge, stoner, noise, psych and experimental music
  • Artwork by Stephen O'Malley
  • Irradiated rat fossil drawing by Savage Pencil
  • Made in Akron, Ohio, USA

Controls

  • Octave (O): progressively blends in the analog octave-up
  • Distortion (D): controls distortion amount, with approximately +60dB of gain available
  • Filter (F): low-pass filter. Counterclockwise adds high end, clockwise removes it
  • Amplitude (AMP): output volume for the Octave/Distortion section
  • Magnitude (MAG): output level of the independent MOSFET booster
  • Clip: selects OpAmp, Asymm or Symm clipping

Clipping modes

OpAmp:

  • No clipping diodes
  • Maximum output and openness
  • Rawer, more aggressive attack
  • Op-amp saturation

Asymm:

  • 2 silicon diodes + 1 LED
  • Asymmetrical clipping
  • Smoother and slightly compressed
  • More tube-like crunch

Symm:

  • 2 silicon diodes
  • Classic circuit configuration
  • Tighter compression
  • Traditional White Face / RAT-style crunch

Footswitches and expression

  • Amplitude Footswitch: engages Octave + Distortion
  • Magnitude Footswitch: engages the Booster
  • Flexi-Switch: momentary or latching operation
  • Octave EXP: expression control over octave blend

Technical specifications

  • Type: octave distortion + clean booster
  • Circuit: analog
  • Octave: all-discrete analog full-wave rectifier
  • Distortion: White Face / RAT-style
  • Boost: all-discrete MOSFET
  • Distortion gain: approx. +60dB
  • Clipping: OpAmp / Asymmetrical / Symmetrical
  • Signal path: Octave > Distortion > Boost
  • Bypass: relay-based true bypass
  • Switching: Flexi-Switch momentary/latching
  • Octave/Distortion input impedance: 1MΩ
  • Octave/Distortion output impedance: <1kΩ
  • Booster input impedance: 500kΩ
  • Booster output impedance: <1kΩ
  • Power: 9V DC center-negative
  • Connector: 2.1mm
  • Current draw: 15mA
  • Do not operate above 9V
  • Dimensions: 127 × 70 × 57 mm
  • Dimensions: 5.00" × 2.75" × 2.25"
  • Approx. weight: 333 g
  • Made in Akron, Ohio, USA

Find the EarthQuaker Devices Sunn O))) HalfLife at onemorepedal.com.

Half the life, half the box, and absolutely no intention of sounding half as heavy.


ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • Sunn O))) HalfLife Octave Distortion + Booster
Finish
  • Various
Categories
Year
  • 2026 - Present
Made In
  • United States
Pedal Format
  • Standard

Product safety information may be available here.

About the seller

ONE MORE PEDAL

Málaga, Spain
Joined Reverb:2022

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Promoted similar listings













Product reviews

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.